Highly efficient crystal deflector for channeling extraction of a proton beam from accelerators

V. Guidi,C. Malagu,G. Martinelli,M. Stefancich,D. Vincenzi,V. M. Biryukov,Yu. A. Chesnokov,V. I. Kotov,W. Scandale

DOI: https://doi.org/10.48550/arXiv.physics/0306126

2003-06-16

Abstract:The design and performance of a novel crystal deflector for proton beams are reported. A silicon crystal was used to channel and extract 70 GeV protons from the U-70 accelerator in Protvino with an efficiency of 85%, as measured for a beam of ~1e12 protons directed towards crystals of ~2 mm length in spills of ~2 s duration. Experimental data agree with the theoretically predicted Monte Carlo results for channeling. The technique allows one to manufacture a very short deflector along the beam direction (2 mm). Consequently, multiple encounters of circulating particles with the crystal are possible with little probability of multiple scattering and nuclear interactions per encounter. Thus, drastic increase in efficiency for particle extraction out of the accelerator was attained. We show the characteristics of the crystal- deflector and the technology behind it. Such an achievement is important in devising a more efficient use of the U-70 accelerator and provides crucial support for implementing crystal-assisted slow extraction and collimation in other machines, such as the Tevatron, RHIC, the AGS, the SNS, COSY, and the LHC.

Accelerator Physics,Instrumentation and Detectors

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to efficiently extract proton beams from accelerators, especially by using crystal deflectors to achieve this goal. Specifically, the researchers aim to develop a new type of crystal deflector that can extract 70 - GeV proton beams from the U - 70 accelerator with high efficiency (more than 85%). The following are the key problems and solutions mentioned in the paper:

1. **Improving extraction efficiency**:
- Traditional proton - beam extraction methods have low efficiency and are easily affected by multiple scattering and nuclear reactions.
- By using very short silicon crystals (about 2 mm long), the researchers achieved effective deflection and extraction of proton beams, significantly improving the extraction efficiency.

2. **Reducing the probability of multi - particle interactions**:
- Using short crystals can reduce the probability of scattering and nuclear reactions of particles during each passage, thus avoiding the efficiency decline caused by multiple interactions.

3. **Optimizing crystal design and manufacturing techniques**:
- The researchers developed a new crystal - bending system. By using the anisotropic properties of crystal materials, the crystal is made to bend longitudinally while twisting in the orthogonal direction, forming a saddle - shaped structure.
- The shape and size of the crystal are carefully designed to ensure that it can maintain optimal performance under experimental conditions.

4. **Chemical treatment to remove surface defects**:
- In order to improve the efficiency of the channeling effect, the researchers carried out chemical treatment on the crystal surface, removing the defective layer (about 30 μm thick) introduced during mechanical cutting, thus improving the overall channeling efficiency of the crystal.

5. **Experimental verification**:
- The performance of the new crystal deflector was verified through tests in an external proton beam and in the U - 70 accelerator ring. The results show that chemically polished crystals exhibit higher uniformity and sharpness in proton - beam deflection, and the extraction efficiency reaches 85.3±2.8%.

In conclusion, the main goal of this paper is to significantly improve the efficiency of proton - beam extraction from accelerators by developing and optimizing new crystal deflectors, and to provide technical support for slow extraction and calibration in other accelerators (such as Tevatron, RHIC, AGS, SNS, COSY and LHC).