Abstract:The generalized stacking fault energy (GSFE) is a material property that can provide invaluable insights into describing nanoscale plasticity phenomena in crystalline materials. Lattice strains have been suggested to influence such phenomena. Here, the GSFE curves for sequential faulting pathways in dual phase [face-centered cubic (fcc) and hexagonal close-packed (hcp)] ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}, {\mathrm{Cr}}_{25}{\mathrm{Fe}}_{25}{\mathrm{Co}}_{25}{\mathrm{Ni}}_{25}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{34}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{6}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{30}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{10}$, and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$ high-entropy alloys are investigated on ${{111}}_{\text{fcc}}$ and ${(0002)}_{\text{hcp}}$ close-packed planes using density-functional calculations. The dependence of GSFEs on imposed volumetric and longitudinal lattice strains is studied in detail for ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}$ and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$. The competition between various plastic deformation modes is discussed for both phases based on effective energy barriers determined from the calculated GSFEs and compared with experimentally observed deformation mechanisms. The intrinsic stacking fault energy, unstable stacking fault energy, and unstable twinning fault energy are found to be closely related in how they are affected by applied strain. The ratio of two of these planar fault energies can thus serve as characteristic material property. An inverse relationship between the intrinsic stacking fault energy in the hcp phase and the axial ratio ${(c/a)}_{\text{hcp}}$ is revealed and explained via band theory.

Phase interface induced stacking faults in Al-7.5Y alloy revealed by in-situ synchrotron X-ray diffraction and ex-situ electron microscopy

Shearing Mechanisms of Stacking Fault and Anti-Phase-boundary Forming Dislocation Pairs in the Γ′ Phase in Ni-based Single Crystal Superalloy

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Stacking faults in a mechanically strong Al(Mg)–Al3Mg2 composite

Strength-ductility synergy induced by high-density stacking faults in aluminum alloy composites with micro/nano hybrid reinforcements

Effect of strain on generalized stacking fault energies and plastic deformation modes in fcc-hcp polymorphic high-entropy alloys: A first-principles investigation

Phase stability and the interface structure of a nanoscale Si crystallite in Al-based alloys

Stacking fault segregation imaging with analytical field ion microscopy

Computational Thermodynamic and First-Principles Calculation of Stacking Fault Energy on Ternary Co-based Alloys

Unraveling the dynamics of stacking fault nucleation in ceramics: A case study of aluminum nitride

Doping Effects on the Stacking Fault Energies of Theγ' Phase in Ni-based Superalloys

The Nucleation of Δ Phases Triggered by the Stacking Faults in a Single Crystal Superalloy

Effect of Stacking Fault Energy on the Grain Structure Evolution of FCC Metals During Friction Stir Welding

Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults

Mechanical behavior and microstructure evolution of Al/AlCu alloy interface

Role of interfaces in the deformation behavior of lamellar TiAl-based alloys with CPFEM simulation

Stacking fault energy induced softening in the nucleation limited plasticity regime: a molecular dynamics study on Cu-Al alloys

Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy

Can experiment determine the stacking fault energy of metastable alloys?

Effects of Alloying Elements on the Stacking Fault Energies of Ni58Cr32Fe10 Alloys: A First-Principle Study

First-principles calculations for understanding microstructures and mechanical properties of co-sputtered Al alloys