Abstract:The CABRI research reactor located at CEA Cadarache is dedicated to the analysis of nuclear fuel behavior during Reactivity-Injection Accident (RIA) in Pressurized Water Reactors (PWRs). The reactor experimentally simulates power pulse transients in the driver zone, which induce a RIA-representative energy deposition in a fuel sample contained in a water-loop that reproduces PWR thermal-hydraulics conditions. Power pulses are initiated by the 3 He depressurization of four transient rods, which introduces reactivity into the core. The injection of reactivity causes the reactor power to increase rapidly, resulting in a rise in fuel temperature. This temperature rise mitigates the power excursion by the Doppler effect. Subsequently, heat transfer occurs between the fuel, the cladding and the moderator. The evolution of the core power is measured during power transients, and these measurements can be valorized for the experimental validation of multi-physics simulation tools. Indeed, the experimental validation of these coupling mainly relies on measurement data coming from the current industrial reactor fleet. The measurement data coming from experimental facilities for the validation of multi-physics coupling at the reactor scale are very rare. A multi-physics core modelling based on the APOLLO3® and THEDI tools within the coupling platform C3PO was developed to simulate power transients in the CABRI reactor. A step-wise validation process has been defined and applied to this multi-physics coupling, from the numerical validation against Monte Carlo calculations at the neutron lattice level, to the integral experimental validation at the core level. Two types of transients were simulated: firstly, three neutron-driven supercritical transients (in which reactivity feedbacks are negligible), and secondly, a prompt supercritical transient, which is a high-energy transient with a five-decade power increase. The Calculation/Measurement (C/M) discrepancies on core power during supercritical transients can be explained with the support of the numerical validation results. However, the C/M discrepancies on the high-energy transient will require further investigation. A methodology to propagate nuclear data covariances in the multi-physics coupled simulation has been defined and implemented for CABRI transients. The first results of the covariance propagation on the high-energy transient showed that they cannot explain the C/M discrepancies. The impact of technological and experimental uncertainties on the transient simulation have to be analyzed. Finally, only the global core power is measured by ex-core instrumentation during the transient; it would be useful to carry out new local measurements at the pin-scale in the near future.

The Transient Multi-Level method for Monte Carlo reactor statics calculations

Convergence Characteristics and Acceleration of the Transient Fixed Source Equation Solved by Monte Carlo Method

Coupling RMC and CFD for Simulation of Transients in TREAT Reactor

Transient Monte Carlo simulations with OpenMC(TD): A catalyst towards advancing research in next-generation reactors and to improve fission nuclear data

Kinetic Methods in Monte Carlo Code RMC and Its Implementation to C5G7-TD Benchmark

RMC Solutions to 2 D / 3 D All Kinetic Cases of C 5 G 7-TD Benchmark

RMC Solutions to Kinetic Cases of C5G7-TD Benchmark

Neutron Generation Based Method for Monte Carlo Three-Dimensional Reactor Time-Dependent Simulation

TMCC: A transient three-dimentional neutron transport code by the direct simulation method

RMC - A Monte Carlo code for reactor physics analysis

Dynamic Monte Carlo Method for Nuclear Reactor Kinetics Calculations

RMC – A Monte Carlo Code for Reactor Core Analysis

A stochastic method for transient, three-dimensional neutron transport

Comparison of Nested Geometry Treatments within GPU-Based Monte Carlo Neutron Transport Simulations of Fission Reactors

Monte-Carlo Methods for the Neutron Transport Equation

Transactions of the Korean Nuclear Society Virtual Autumn Meeting December 17-18 Group Constants Generation using MCS Monte Carlo Code for Fast Reactor Analysis

New Strategies of Sensitivity Analysis Capabilities in Continuous-Energy Monte Carlo Code RMC

A hybrid Monte Carlo and response matrix Monte Carlo method in criticality calculation

ICONE19-43235 Development of a Monte Carlo Multi-group Constants Generation Code

Analysis of Fission Matrix Databases with Nonuniform Fuel Temperature Profiles for Static and Transient Calculations

Analysis of power transients in the CABRI experimental reactor with a multi-physics APOLLO3®/THEDI coupling