Abstract:One of the major challenges of applying hydrogen (H 2 ) enriched fuels in industrial combustion systems is the risk of flashback that can cause considerable damage on combustors and affect pollutant emissions. While flashback has been extensively investigated, comparatively less analysis is made to understand the impact of thermal boundary conditions on flashback of bluff-body swirling H 2 enriched flames. The aim of this work is to fill a part of this gap through large-eddy simulations of premixed 95%H 2 /5%CH 4 -air flame flashback in a bluff-body swirl burner. The results show that flashback characteristics are very sensitive to the bluff-body thermal boundary condition. At T wall = 350 K, flashback is led by a large-scale swirling flame tongue (Mode I) that can cause the deflection of streamlines ahead of the flame front and is responsible for flashback Mode I, while a small region of negative velocity induced by small-scale flame bulges cannot lead to a net upstream propagation of the flame front. However, when treating the bluff-body as an adiabatic wall, the flashback is led by multiple small-scale flame bulges, and the circumferential motion of the lowest flame tip is negligible (Mode II). These small-scale bulges can cause large reverse flow pockets and formation of a stagnation point ahead of the preheat zone that facilitates flashback, similar to non-swirling channel flashback. This is the main mechanism responsible for flashback Mode II. At T wall = 500 K, flashback is led by different structures, switching between Mode I (upstream propagation of swirling flame tongue) to Mode II (upstream propagation of non-swirling flame bulges). Furthermore, it is found that as the boundary heat loss increases, the axial flashback speed decreases, while the azimuthal flashback speed increases due to the presence of Mode I. The results open up the possibility of extending the flashback limit of H 2 enriched swirling flames by controlling the thermal condition of bluff body.

Thermal runaway effect of the centerbody on boundary layer flashback in a swirl-stabilized gas turbine burner operated with hydrogen

Regimes of Premixed Turbulent Spontaneous Ignition and Deflagration under Gas-Turbine Reheat Combustion Conditions

Study of the effect of bluff body size on stability limits of a premixed natural gas swirl burner

Stabilization regimes and pollutant emissions from a dual fuel CH4/H2 and dual swirl low NOx burner

Numerical investigation of boundary layer flashback of CH 4 /H 2 /air swirl flames under different thermal boundary conditions in a bluff‐body swirl burner

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Flame investigations of a laboratory-scale CECOST swirl burner at atmospheric pressure conditions

Effects of Soret and Differential Diffusion on Boundary Layer Flashback of H2/CH4 Swirling Flames

Flame radiation feedback to fuel surface in medium ethanol and heptane pool fires with cross air flow

Stability, near flashback combustion dynamics, and NOx emissions of H 2 /N 2 /air flames in a micromixer-based model gas turbine combustor

Spray flames in an air-heptane swirling combustor

Lean Flame Root Dynamics in a Gas Turbine Model Combustor

Flashback propensity due to hydrogen blending in natural gas: sensitivity to operating and geometrical parameters

Flame-wall interaction of thermodiffusively unstable hydrogen/air flames -- Part II: Parametric variations of equivalence ratio, temperature, and pressure

Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor

Direct Numerical Simulation on Auto-Ignition Characteristics of Turbulent Supercritical Hydrothermal Flames

Investigation of turbulent premixed methane/air and hydrogen-enriched methane/air flames in a laboratory-scale gas turbine model combustor

Fuel Temperature Effects on Combustion Stability of a High-Pressure Liquid-Fueled Swirl Flame

Study of Flame–flow Interactions in Turbulent Boundary Layer Premixed Flame Flashback over a Flat Plate Using Direct Numerical Simulation

Thermal diffusion, exhaust gas recirculation and blending effects on lean premixed hydrogen flames