Brake-actuated steering control strategy for turning of articulated vehicles

Francesco Amoruso,David Cebon

DOI: https://doi.org/10.1080/00423114.2024.2342535

IF: 3.749

2024-04-27

Vehicle System Dynamics

Abstract:The use of high-capacity vehicles has been shown to significantly reduce carbon dioxide emissions from heavy goods transport and improve the efficiency of the transport sector. Despite their benefits, current legislations regarding the dimensions and weight of the vehicles have limited the widespread use of heavier and longer vehicles. Long vehicles are less manoeuvrable and often necessitate technological interventions to pass manoeuvrability tests. Various rear-steering systems proposed to solve these issues lead to high costs and mass penalties compared to standard fixed axles. This paper presents a new steering concept which utilises the axles' existing brake actuators to steer, eliminating the need for dedicated actuators on the axle and associated steering hardware. Brakes are individually controlled on each side of a freely steerable axle to generate the necessary torque about the kingpins causing it to steer. A validated vehicle model is used to design a feedback steering strategy based on path-following steering control for low-speed manoeuvring. The proposed system's performance is compared to conventional vehicles and current state-of-the-art active-steering systems through simulations. It demonstrates comparable steering performance to that of electro-hydraulic active-steer systems, with an estimated 50% reduction in both mass and costs.

engineering, mechanical

What problem does this paper attempt to address?

### Problems the paper attempts to solve

The paper aims to solve the maneuverability problem of heavy - duty vehicles (especially heavy goods vehicles with long wheelbases and high load - carrying capacities, HGVs) when turning. Specifically, the paper proposes a new concept named "Brake - Actuated Steering (BAS)", which uses existing brakes to achieve rear - axle steering, thereby improving the vehicle's handling performance and safety.

### Background and motivation

1. **Carbon emissions and transportation efficiency**:
- The use of high - capacity vehicles (HCVs) can significantly reduce carbon dioxide emissions in heavy - goods transportation and improve transportation efficiency.
- However, current regulations on vehicle size and weight limit the wide application of longer and heavier vehicles.

2. **Maneuverability challenges**:
- Vehicles with long wheelbases have poor maneuverability when turning and need technical intervention to pass maneuverability tests.
- Although various current rear - axle steering systems can solve the problem, they will lead to an increase in cost and mass.

3. **Limitations of existing solutions**:
- The electro - hydraulic active steering system (EH - AS) is one of the most advanced solutions, but its additional mass and cost are approximately 1 ton and £10,000 respectively, which limits its wide adoption.

### Proposed solutions

1. **BAS concept**:
- Use existing brakes to achieve rear - axle steering, eliminating the need for dedicated steering actuators and their associated hardware.
- By individually controlling the brakes of each wheel, generate the necessary torque to steer the axle.

2. **Control system design**:
- Use a path - following control strategy (PFC) to ensure that the rear end of the trailer accurately tracks the path of the fifth - wheel coupling point.
- Design a PID feedback controller to compensate for unexpected disturbances or dynamic changes and ensure accurate tracking of the steering angle.

3. **Performance evaluation**:
- Compare the performance of the BAS system with that of traditional vehicles and the current state - of - the - art active steering systems through simulation.
- The results show that the steering performance of the BAS system is comparable to that of the electro - hydraulic active steering system, and the estimated mass is reduced by 50% and the cost is reduced by 50%.

### Potential advantages

1. **Mass and cost reduction**:
- The BAS system significantly reduces the mass and cost of the steering system, making it an attractive commercial solution for fleet operators.

2. **Improved maneuverability**:
- It improves the safe handling performance of various types of vehicles in confined spaces, especially in low - speed operations.

3. **Environmental benefits**:
- By reducing tire wear and using low - rolling - resistance tires, it potentially reduces fuel consumption by 7 - 9% and further reduces carbon emissions.

### Future work

1. **Real - vehicle testing**:
- Conduct real - vehicle tests to verify the concept of the BAS prototype system.
- Further optimize the control strategy and system design through experimental data.

2. **Extended application**:
- Apply the BAS system to more heavy - duty vehicles, especially those with long wheelbases and high load - carrying capacities, to improve their performance in various application scenarios.

Through these research and development efforts, the BAS system is expected to improve the maneuverability and safety of heavy - duty vehicles while reducing operating costs and environmental impacts.