Abstract:Lithium (Li) metal is regarded as the holy grail among various anode candidates due to its extremely high specific energy and low electrochemical potential. Nevertheless, uncontrolled dendrite growth and an unstable electrode/electrolyte interface become the bottleneck for the development of rechargeable Li metal batteries. Although many research studies have focused on designing porous electrode architectures to reduce the local current density and delay the Li dendrite growth, constructing a stable reaction interface is still highly desired. Herein, we ingeniously designed a facile immersion and subsequent annealing method to fabricate a nitrogen-doped carbonized cellulose fiber (N-CF). The nitrogen element can not only bridge the polyacene reaction of cellulose in the process of lower calcination temperatures to improve the mechanical strength but also improve the lithophilic property of a current collector by nitrogen doping at higher calcination temperatures. Therefore, the as-synthesized N-CF can maintain good structural integrity during the cycle and promote the stability of the electrode/electrolyte interface. As a result, when matched with a commercial LiNi0.5Co0.2Mn0.3O2 cathode, the capacity retention of a N-CF//LiNi0.5Co0.2Mn0.3O2 full cell can reach as high as 83.1% after 250 cycles. Our work reveals a facile approach to regulate the Li deposition behavior and stabilize the electrode/electrolyte interface simultaneously.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08572?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08572</a>.Element mapping (Figure S1); the cross-sectional SEM image (Figure S2); XPS spectra (Figure S3); detailed voltage–capacity spectra (Figure S4); enlarged EIS spectra (Figure S5); nitrogen adsorption–desorption isotherms (Figure S6); enlarged voltage profiles of the symmetric Li metal cell (Figure S7); image comparison (Figure S8); the detailed SEM images of Li deposition morphology with the CF current collector after (a) 1 cycle and (b) 10 cycles (Figure S9); different magnification SEM figures of Li metal morphologies with CF (a–c) and N-CF (d–f) current collectors when deposited with 10 mAh cm–2 Li metal (Figure S10); the enlarged voltage profile of CF and N-CF electrodes at the first cycle (Figure S11); the tests of Li||NCM523 full cells at 1.0C with capacity ratios of anode/cathode of 3 (NCM loading of 16.254 mg cm–2) (Figure S12); the physical properties of CF and N-CF current collectors (Table S1); the specific capacity of the composite anode with CF (Table S2); mass content of different element in N-CF (Table S3); and voltage delay (Table S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08572/suppl_file/sc0c08572_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Surface modification of carbon fiber cloth with graphene oxide through an electrophoresis method for lithium metal anode

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Ironing Controllable Lithium into Lithiotropic Carbon Fiber Fabric: A Novel Li-Metal Anode with Improved Cyclability and Dendrite Suppression

Straw-Brick-Like Carbon Fiber Cloth/Lithium Composite Electrode as an Advanced Lithium Metal Anode

Carbonized polymer dots functionalized graphene to regulate lithium homogenous deposition and SEI formation dynamics

Regulating Lithium Nucleation Via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Construction of Hierarchical Surface on Carbon Fiber Paper for Lithium Metal Batteries with Superior Stability

Surface graphited carbon scaffold enables simple and scalable fabrication of 3D composite lithium metal anode

Self-Standing N-Doped Carbonized Cellulose Fiber as a Dual-Functional Host for Lithium Metal Anodes

Pseudocapacitance Induced Uniform Plating/Stripping of Li Metal Anode in Vertical Graphene Nanowalls

Carbon Cloth Supported Lithiophilic Carbon Nanotubes@ag Skeleton for Lithium Anode Via Ultrafast Joule Heating Method

Regulating Lithium Nucleation and Deposition via MOF‐Derived Co@C‐Modified Carbon Cloth for Stable Li Metal Anode

Uniform Deposition of Li-Metal Anodes Guided by 3D Current Collectors with In Situ Modification of the Lithiophilic Matrix

Carbon Cloth with Lithiophilic Carbon-Coated ZnO Nanotubes As Anode Current Collector for Hybrid Lithium Ion/lithium Metal Battery

Commercial carbon cloth: An emerging substrate for practical lithium metal batteries

Constructing Co<sub>3</sub>O<sub>4</sub> Nanowires on Carbon Fiber Film as a Lithiophilic Host for Stable Lithium Metal Anodes

Copper oxide decorated carbon nanofiber skeleton for dendrite‐free Li‐metal anodes

Lithiated Carbon Cloth As a Dendrite-Free Anode for High-Performance Lithium Batteries

Infiltrating Lithium into Carbon Cloth Decorated with Zinc Oxide Arrays for Dendrite-Free Lithium Metal Anode

Carbon nanotubes loaded with carbon nanofibers as scaffold for Li metal battery anodes

In situ fluoro-oxygen codoped graphene layer for high-performance lithium metal anode