Comment on "A Real-Time Approach for Chance-Constrained Motion Planning with Dynamic Obstacles"

Hai Zhu,Javier Alonso-Mora

DOI: https://doi.org/10.48550/arXiv.2006.02747

IF: 3.7

2020-06-04

Robotics

Abstract:This comment presents the results of using chance-constrained model predictive control (MPC) to solve a one-horizon benchmark collision avoidance problem.

What problem does this paper attempt to address?

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Yanchuan Xu,Huarong Zheng,Weimin Wu,Jun Wu

DOI: https://doi.org/10.1016/j.ifacol.2020.12.056

2020-01-01

Abstract:A robust hierarchical path planning and trajectory tracking framework is proposed to maintain a collision-free path for autonomous vehicles. For the path-planning, a constrained finite-time optimal problem is solved to generate a feasible and collision-free trajectory considering the vehicle kinematics. For the trajectory-tracking, a motion controller is proposed by solving a constrained model predictive control problem, obtaining the front wheel steering angles. Furthermore, to enhance the robustness of the motion controller against the uneven network-induced time delay and unmodelled lateral vehicle dynamics, an additional error feedback mechanism is introduced in the motion controller. Simulations are conducted when both moving obstacles and static obstacles exist. Simulation results show that the proposed hierarchical control framework can effectively guarantee safe and feasible driving maneuvers.
A Real-Time Approach for Chance-Constrained Motion Planning with Dynamic Obstacles

Manuel Castillo-Lopez,Philippe Ludivig,Seyed Amin Sajadi-Alamdari,Jose Luis Sanchez-Lopez,Miguel A. Olivares-Mendez,Holger Voos

DOI: https://doi.org/10.1109/LRA.2020.2975759

2020-05-07

Abstract:Uncertain dynamic obstacles, such as pedestrians or vehicles, pose a major challenge for optimal robot navigation with safety guarantees. Previous work on motion planning has followed two main strategies to provide a safe bound on an obstacle's space: a polyhedron, such as a cuboid, or a nonlinear differentiable surface, such as an ellipsoid. The former approach relies on disjunctive programming, which has a relatively high computational cost that grows exponentially with the number of obstacles. The latter approach needs to be linearized locally to find a tractable evaluation of the chance constraints, which dramatically reduces the remaining free space and leads to over-conservative trajectories or even unfeasibility. In this work, we present a hybrid approach that eludes the pitfalls of both strategies while maintaining the original safety guarantees. The key idea consists in obtaining a safe differentiable approximation for the disjunctive chance constraints bounding the obstacles. The resulting nonlinear optimization problem is free of chance constraint linearization and disjunctive programming, and therefore, it can be efficiently solved to meet fast real-time requirements with multiple obstacles. We validate our approach through mathematical proof, simulation and real experiments with an aerial robot using nonlinear model predictive control to avoid pedestrians.

Robotics,Optimization and Control
Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Wei Li,Rong Xiong

DOI: https://doi.org/10.1109/access.2019.2925428

IF: 3.9

2019-01-01

IEEE Access

Abstract:Task-constrained motion planning (TCMP) is involved in many practical applications, such as opening the door, opening the drawer, twisting the screw, and so on. Because of the trend of man-machine collaboration and the existence of dynamic in environments, planning the collision-free motions for task-constrained manipulation is a significative problem. This paper explores the TCMP issue for mobile manipulation, which uses a mobile base to enhance the working range and flexibility but simultaneously makes the problem harder than that of single manipulation because of the additional degrees of freedom (dofs). We propose an optimization-based method to plan the obstacle avoidance motion in real-time. First, the global robotic Jacobian matrix that combines the omnidirectional base and the robotic arm is derived. Second, model predictive control is used to plan the control rule in order to maximize the closest distance between the obstacles and the mobile manipulator and minimize the velocities of null space at the same time. We have deduced the model with four differential equations that represent the law of the distance over time. Third, the distances are calculated and sent to the model to calculate the velocity of each joint of the arm and the base using ACADO that is an open-source toolkit. Using the velocities, the mobile manipulator can move away from the approaching people while still fixing the end of the arm to manipulate tool at the same time. Our method is verified on the mobile manipulator that consists of four Mecanum wheels, a base, a UR10 arm, and four kinect cameras in Gazebo simulation with using the ROS operation.
An Autonomous Robot for Collision-Free Person Following Through Model Predictive Control

Wenjie Lei,Ruize Wang,Tianhao Liang,Qinyuan Ren

DOI: https://doi.org/10.1109/iecon51785.2023.10312073

2023-01-01

Abstract:A crucial aspect of human-robot integration is the implementation of person-following robots. However, autonomous robots continue to face challenges in tracking individuals within complex environments with dynamic obstacles. Traditional approaches to combining global and local planning are inadequate for this task due to the high level of uncertainty in the environment and the flexible behavior of the following target. To address these challenges, this paper proposes a framework for motion planning for wheeled robots. This method integrates dynamic obstacle avoidance and dynamic target following into an optimization problem based on model predictive control (MPC) with terminal constraint set to guarantee the safety of the following task in dynamic obstacle environments. Therefore, in this paper, a high-frequency state estimator is used to predict human behavior, and a spring model is used to model dynamic obstacles in the environment to keep the robot away from the obstacles. The effect of the person following is thoroughly tested in simulation with multiple scenarios and the comparison experiment, verifying the real-time effectiveness of the method.
Scenario-Based Motion Planning with Bounded Probability of Collision

Oscar de Groot,Laura Ferranti,Dariu Gavrila,Javier Alonso-Mora

2023-07-03

Abstract:Robots will increasingly operate near humans that introduce uncertainties in the motion planning problem due to their complex nature. Typically, chance constraints are introduced in the planner to optimize performance while guaranteeing probabilistic safety. However, existing methods do not consider the actual probability of collision for the planned trajectory, but rather its marginalization, that is, the independent collision probabilities for each planning step and/or dynamic obstacle, resulting in conservative trajectories. To address this issue, we introduce a novel real-time capable method termed Safe Horizon MPC, that explicitly constrains the joint probability of collision with all obstacles over the duration of the motion plan. This is achieved by reformulating the chance-constrained planning problem using scenario optimization and predictive control. Our method is less conservative than state-of-the-art approaches, applicable to arbitrary probability distributions of the obstacles' trajectories, computationally tractable and scalable. We demonstrate our proposed approach using a mobile robot and an autonomous vehicle in an environment shared with humans.

Robotics
Moving Obstacle Collision Avoidance via Chance-Constrained MPC with CBF

Ming Li,Zhiyong Sun,Zirui Liao,Siep Weiland

2023-04-04

Abstract:Model predictive control (MPC) with control barrier functions (CBF) is a promising solution to address the moving obstacle collision avoidance (MOCA) problem. Unlike MPC with distance constraints (MPC-DC), this approach facilitates early obstacle avoidance without the need to increase prediction horizons. However, the existing MPC-CBF method is deterministic and fails to account for perception uncertainties. This paper proposes a generalized MPC-CBF approach for stochastic scenarios, which maintains the advantages of the deterministic method for addressing the MOCA problem. Specifically, the chance-constrained MPC-CBF (CC-MPC-CBF) technique is introduced to ensure that a user-defined collision avoidance probability is met by utilizing probabilistic CBFs. However, due to the potential empty intersection between the reachable set and the safe region confined by CBF constraints, the CC-MPC-CBF problem can pose challenges in achieving feasibility. To address this issue, we propose a sequential implementation approach that involves solving a standard MPC optimization problem followed by a predictive safety filter optimization, which leads to improved feasibility. Furthermore, we introduce an iterative convex optimization scheme to further expedite the resolution of the predictive safety filter, which results in an efficient approach to tackling the non-convex CC-MPC-CBF problem. We apply our proposed algorithm to a 2-D integrator system for MOCA, and we showcase its resilience to obstacle measurement uncertainties and favorable feasibility properties.

Systems and Control
Real-Time Dynamic Obstacle Avoidance for Robot Manipulators Based on Cascaded Nonlinear MPC With Artificial Potential Field

Tianqi Zhu,Jianliang Mao,Linyan Han,Chuanlin Zhang,Jun Yang

DOI: https://doi.org/10.1109/tie.2023.3306405

IF: 7.7

2023-01-01

IEEE Transactions on Industrial Electronics

Abstract:Nowadays, the realization of obstacle avoidance for robot manipulators are generally based on offline path planning, which may be insufficient for real-time dynamic obstacle avoidance scenarios. In order to achieve safe and smooth avoidance of dynamic obstacles, a low-latency motion planning algorithm, which takes into account the dynamic planning is of practical significance. Toward this end, this article proposes a cascaded nonlinear model predictive control (MPC) assigned with a two-stage optimization problem. Specially, the high-level MPC combines artificial potential field as a motion planner to generate foresight smooth trajectories. The low-level MPC acts as a trajectory tracker and a safety protector, taking along hard constraints to avoid collisions and singularities. In addition, a super-twisting observer is deployed to enhance the motion estimation accuracy of dynamic obstacles. Experimental results show that the proposed approach is beneficial to achieve safe and smooth dynamic obstacle avoidance in real-world scenarios.

automation & control systems,engineering, electrical & electronic,instruments & instrumentation
Real-time Motion Planning and Trajectory Tracking in Complex Environments Based on Bézier Curves and Nonlinear MPC Controller

Xi Yu,Wenjun Zhu,Li Xu

DOI: https://doi.org/10.1109/ccdc49329.2020.9163994

2020-01-01

Abstract:In this paper, we propose a real-time motion planning system and a precise trajectory tracking controller for unmanned aerial vehicles autonomous navigation in complex environments. Based on the simple path planned by the path searching method, we generate the convex flight corridors for quadrotor safe flying by cube inflation. We generate the trajectories composed with piecewise Bézier curves in these convex flight corridors by formulating thé problem as a quadratic program. The time of the trajectories is re-allocated to satisfy the dynamic feasibility. We apply a nonlinear model predictive controller (NMPC) considering the full system model to track the generates trajectories. The performance of our proposed method is tested in a complex simulation system.
Safe Chance-constrained Model Predictive Control under Gaussian Mixture Model Uncertainty

Kai Ren,Colin Chen,Hyeontae Sung,Heejin Ahn,Ian Mitchell,Maryam Kamgarpour

2024-01-08

Abstract:We present a chance-constrained model predictive control (MPC) framework under Gaussian mixture model (GMM) uncertainty. Specifically, we consider the uncertainty that arises from predicting future behaviors of moving obstacles, which may exhibit multiple modes (for example, turning left or right). To address the multi-modal uncertainty distribution, we propose three MPC formulations: nominal chance-constrained planning, robust chance-constrained planning, and contingency planning. We prove that closed-loop trajectories generated by the three planners are safe. The approaches differ in conservativeness and performance guarantee. In particular, the robust chance-constrained planner is recursively feasible under certain assumptions on the propagation of prediction uncertainty. On the other hand, the contingency planner generates a less conservative closed-loop trajectory than the nominal planner. We validate our planners using state-of-the-art trajectory prediction algorithms in autonomous driving simulators.

Systems and Control
Collision Avoidance for Autonomous Vehicles Based on MPC with Adaptive APF

Hongjiu Yang,Yongqi He,Yang Xu,Hai Zhao

DOI: https://doi.org/10.1109/tiv.2023.3337417

IF: 8.2

2023-01-01

IEEE Transactions on Intelligent Vehicles

Abstract:In this paper, a model predictive control (MPC) strategy is developed to realize collision avoidance with dynamic obstacle vehicles for an autonomous vehicle. A novel collision constraint based on road width and vehicle shape is proposed to ensure a safe distance between the autonomous vehicle and an obstacle vehicle. A smooth path is guaranteed in collision avoidance by the adaptive artificial potential field (APF) method for the autonomous vehicle using the MPC strategy. Both recursive feasibility and practical stability are analyzed for the autonomous vehicle based on the MPC strategy with multiple constraints and variable longitudinal velocity. Experimental results are presented to demonstrate the effectiveness and superiority of the MPC strategy with the adaptive APF method.
Risk-Averse Receding Horizon Motion Planning for Obstacle Avoidance using Coherent Risk Measures

Anushri Dixit,Mohamadreza Ahmadi,Joel W. Burdick

DOI: https://doi.org/10.1016/j.artint.2023.104018

2023-09-28

Abstract:This paper studies the problem of risk-averse receding horizon motion planning for agents with uncertain dynamics, in the presence of stochastic, dynamic obstacles. We propose a model predictive control (MPC) scheme that formulates the obstacle avoidance constraint using coherent risk measures. To handle disturbances, or process noise, in the state dynamics, the state constraints are tightened in a risk-aware manner to provide a disturbance feedback policy. We also propose a waypoint following algorithm that uses the proposed MPC scheme for discrete distributions and prove its risk-sensitive recursive feasibility while guaranteeing finite-time task completion. We further investigate some commonly used coherent risk metrics, namely, conditional value-at-risk (CVaR), entropic value-at-risk (EVaR), and g-entropic risk measures, and propose a tractable incorporation within MPC. We illustrate our framework via simulation studies.

Systems and Control,Robotics,Optimization and Control
Robot Safe Planning In Dynamic Environments Based On Model Predictive Control Using Control Barrier Function

Zetao Lu,Kaijun Feng,Jun Xu,Haoyao Chen,Yunjiang Lou

2024-04-09

Abstract:Implementing obstacle avoidance in dynamic environments is a challenging problem for robots. Model predictive control (MPC) is a popular strategy for dealing with this type of problem, and recent work mainly uses control barrier function (CBF) as hard constraints to ensure that the system state remains in the safe set. However, in crowded scenarios, effective solutions may not be obtained due to infeasibility problems, resulting in degraded controller performance. We propose a new MPC framework that integrates CBF to tackle the issue of obstacle avoidance in dynamic environments, in which the infeasibility problem induced by hard constraints operating over the whole prediction horizon is solved by softening the constraints and introducing exact penalty, prompting the robot to actively seek out new paths. At the same time, generalized CBF is extended as a single-step safety constraint of the controller to enhance the safety of the robot during navigation. The efficacy of the proposed method is first shown through simulation experiments, in which a double-integrator system and a unicycle system are employed, and the proposed method outperforms other controllers in terms of safety, feasibility, and navigation efficiency. Furthermore, real-world experiment on an MR1000 robot is implemented to demonstrate the effectiveness of the proposed method.

Robotics
Predictive Motion Planning for Autonomous Vehicles with Geometric Constraints Via Convex Optimization

Xiaoyuan Zhu,Jian Chen,Yan Ma,Jianqiang Deng,Yuexuan Wang

DOI: https://doi.org/10.1115/dscc2020-3169

2020-01-01

Abstract:In this paper, we propose an MPC-based motion planning algorithm, including a decision-making module, an obstacle-constraints generating module, and an MPC-based planning module. The designed decision module effectively distinguishes between structured and unstructured roads and processes them separately, so that the algorithm is more robust in different environments. Besides, the movement of obstacles is considered in the decision-making and obstacle constraints generating module. By processing obstacles with lateral and longitudinal speed separately, obstacle avoidance can be done in scenarios with moving obstacles, including moving obstacles crossing the road. Instead of treating the vehicle as a mass point, we explicitly consider the geometric constraints by modeling the vehicle as three intersecting circles when generating obstacle constraints. This ensures that the vehicle is collision-free in motion planning, especially when the vehicle turns. For non-convex obstacle constraints, we propose an algorithm that generates up to two alternative linear constraints to convexify the obstacle constraints for improving computational efficiency. In MPC, we consider the vehicle kino-dynamic constraints and two generated linear constraints. Therefore, the proposed method can achieve better real-time performance and can be applied to more complicated traffic scenarios with moving obstacles. Simulation results in three different scenarios show that motion planning can achieve satisfactory performance in both structured and unstructured roads with moving obstacles.
A Collision-Free MPC for Whole-Body Dynamic Locomotion and Manipulation

Jia-Ruei Chiu,Jean-Pierre Sleiman,Mayank Mittal,Farbod Farshidian,Marco Hutter

DOI: https://doi.org/10.48550/arXiv.2202.12385

2022-02-25

Abstract:In this paper, we present a real-time whole-body planner for collision-free legged mobile manipulation. We enforce both self-collision and environment-collision avoidance as soft constraints within a Model Predictive Control (MPC) scheme that solves a multi-contact optimal control problem. By penalizing the signed distances among a set of representative primitive collision bodies, the robot is able to safely execute a variety of dynamic maneuvers while preventing any self-collisions. Moreover, collision-free navigation and manipulation in both static and dynamic environments are made viable through efficient queries of distances and their gradients via a euclidean signed distance field. We demonstrate through a comparative study that our approach only slightly increases the computational complexity of the MPC planning. Finally, we validate the effectiveness of our framework through a set of hardware experiments involving dynamic mobile manipulation tasks with potential collisions, such as locomotion balancing with the swinging arm, weight throwing, and autonomous door opening.

Robotics
Contingency Model Predictive Control for Linear Time-Varying Systems

John P. Alsterda,J. Christian Gerdes

DOI: https://doi.org/10.48550/arXiv.2102.12045

2021-02-27

Abstract:We present Contingency Model Predictive Control (CMPC), a motion planning and control framework that optimizes performance objectives while simultaneously maintaining a contingency plan -- an alternate trajectory that avoids a potential hazard. By preserving the existence of a feasible avoidance trajectory, CMPC anticipates emergency and keeps the controlled system in a safe state that is selectively robust to the identified hazard. We accomplish this by adding an additional prediction horizon in parallel to the typical Model Predictive Control (MPC) horizon. This extra horizon is constrained to guarantee safety from the contingent threat and is coupled to the nominal horizon at its first command. Thus, the two horizons negotiate to compute commands that are both optimized for performance and robust to the contingent event. This article presents a linear formulation for CMPC, illustrates its key features on a toy problem, and then demonstrates its efficacy experimentally on a full-size automated road vehicle that encounters a realistic pop-out obstacle. Contingency MPC approaches potential emergencies with safe, intuitive, and interpretable behavior that balances conservatism with incentive for high performance operation.

Systems and Control,Robotics
MPC-Based Control of Autonomous Vehicles With Localized Path Planning for Obstacle Avoidance Under Uncertainties

Sai Rajeev Devaragudi,Bo Chen

DOI: https://doi.org/10.1115/detc2019-97712

2019-08-18

Abstract:Abstract This paper presents a Model Predictive Control (MPC) approach for longitudinal and lateral control of autonomous vehicles with a real-time local path planning algorithm. A heuristic graph search method (A* algorithm) combined with piecewise Bezier curve generation is implemented for obstacle avoidance in autonomous driving applications. Constant time headway control is implemented for a longitudinal motion to track lead vehicles and maintain a constant time gap. MPC is used to control the steering angle and the tractive force of the autonomous vehicle. Furthermore, a new method of developing Advanced Driver Assistance Systems (ADAS) algorithms and vehicle controllers using Model-In-the-Loop (MIL) testing is explored with the use of PreScan®. With PreScan®, various traffic scenarios are modeled and the sensor data are simulated by using physics-based sensor models, which are fed to the controller for data processing and motion planning. Obstacle detection and collision avoidance are demonstrated using the presented MPC controller.
OA-MPC: Occlusion-Aware MPC for Guaranteed Safe Robot Navigation with Unseen Dynamic Obstacles

Roya Firoozi,Alexandre Mir,Gadi Sznaier Camps,Mac Schwager

2024-10-23

Abstract:For safe navigation in dynamic uncertain environments, robotic systems rely on the perception and prediction of other agents. Particularly, in occluded areas where cameras and LiDAR give no data, the robot must be able to reason about potential movements of invisible dynamic agents. This work presents a provably safe motion planning scheme for real-time navigation in an a priori unmapped environment, where occluded dynamic agents are present. Safety guarantees are provided based on reachability analysis. Forward reachable sets associated with potential occluded agents, such as pedestrians, are computed and incorporated into planning. An iterative optimization-based planner is presented that alternates between two optimizations: nonlinear Model Predictive Control (NMPC) and collision avoidance. Recursive feasibility of the MPC is guaranteed by introducing a terminal stopping constraint. The effectiveness of the proposed algorithm is demonstrated through simulation studies and hardware experiments with a TurtleBot robot. A video of experimental results is available at \url{<a class="link-external link-https" href="https://youtu.be/OUnkB5Feyuk" rel="external noopener nofollow">this https URL</a>}.

Robotics
Simultaneous Trajectory Planning and Tracking Using an MPC Method for Cyber-Physical Systems: A Case Study of Obstacle Avoidance for an Intelligent Vehicle

Hongyan Guo,Chen Shen,Hui Zhang,Hong Chen,Rui Jia

DOI: https://doi.org/10.1109/tii.2018.2815531

IF: 12.3

2018-09-01

IEEE Transactions on Industrial Informatics

Abstract:As a typical example of cyber-physical systems, intelligent vehicles are receiving increasing attention, and the obstacle avoidance problem for such vehicles has become a hot topic of discussion. This paper presents a simultaneous trajectory planning and tracking controller for use under cruise conditions based on a model predictive control (MPC) approach to address obstacle avoidance for an intelligent vehicle. The reference trajectory is parameterized as a cubic function in time and is determined by the lateral position and velocity of the intelligent vehicle and the velocity and yaw angle of the obstacle vehicle at the start point of the lane change maneuver. Then, the control sequence for the vehicle is incorporated into the expression for the reference trajectory that is used in the MPC optimization problem by treating the lateral velocity of the intelligent vehicle at the end point of the lane change as an intermediate variable. In this way, trajectory planning and tracking are both captured in a single MPC optimization problem. To evaluate the effectiveness of the proposed simultaneous trajectory planning and tracking approach, joint veDYNA-Simulink simulations were conducted in the unconstrained and constrained cases under leftward and rightward lane change conditions. The results illustrate that the proposed MPC-based simultaneous trajectory planning and tracking approach achieves acceptable obstacle avoidance performance for an intelligent vehicle.

automation & control systems,computer science, interdisciplinary applications,engineering, industrial
Crash Mitigation in Motion Planning for Autonomous Vehicles

Hong Wang,Yanjun Huang,Amir Khajepour,Teng Liu,Yechen Qin,Yubiao Zhang

DOI: https://doi.org/10.1109/tits.2018.2873921

IF: 8.5

2019-01-01

IEEE Transactions on Intelligent Transportation Systems

Abstract:A motion planning method for autonomous vehicles confronting emergency situations where collision is inevitable, generating a path to mitigate the crash as much as possible, is proposed in this paper. The Model predictive control (MPC) algorithm is adopted here for motion planning. If avoidance is impossible for the model predictive motion planning system, the potential crash severity, and artificial potential field are filled into the controller objective to achieve general obstacle avoidance and the lowest crash severity. Furthermore, the vehicle dynamic is also considered as an optimal control problem. Based on the analysis mentioned earlier, the model predictive controller can optimize the command following, obstacle avoidance, vehicle dynamics, road regulation, and mitigate the inevitable crash based on the predicted values. The proposed MPC algorithm has been proved by simulation to have the ability to avoid obstacles and mitigate the crash if collision is inevitable.
A Robust Mpc Approach for Platooning Control of Automated Vehicles with Constraints on Acceleration

Cong Huang,Quan Shi,Weiping Ding,Ling Liu,Shu Jiang

DOI: https://doi.org/10.2139/ssrn.4198833

2022-01-01

SSRN Electronic Journal

Abstract:This paper deals with the issue of robust model prediction control (MPC) based platooning control of automated vehicles under acceleration constraints. A unified framework is established to characterize the dynamics of cooperative longitudinal motion of the vehicle platoon with modelling parameter uncertainties as well as saturated control input. More specifically, the parameter uncertainties are described by norm bounded and the saturated control input is assumed to be sector-bounded. The coordinated platoon behaves like a linear model where the deviations of the spacing and velocity are selected as the state variables. The main objective of this paper is to develop a robust MPC-based platooning control such that the controlled vehicular platoon can track the leading vehicle under the acceleration constraint and parameter uncertainties, meanwhile maintaining the safety and resource management. By solving the optimization problem, the sufficient condition for MPC-based platooning control system stability in the mean-squared sense and performance analysis are provided and thecontroller gain is obtained at each instant. Finally, a three-car system is adopted to demonstrate the feasibility of the developed control algorithm.

Comment on "A Real-Time Approach for Chance-Constrained Motion Planning with Dynamic Obstacles"

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

A Real-Time Approach for Chance-Constrained Motion Planning with Dynamic Obstacles

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

An Autonomous Robot for Collision-Free Person Following Through Model Predictive Control

Scenario-Based Motion Planning with Bounded Probability of Collision

Moving Obstacle Collision Avoidance via Chance-Constrained MPC with CBF

Real-Time Dynamic Obstacle Avoidance for Robot Manipulators Based on Cascaded Nonlinear MPC With Artificial Potential Field

Real-time Motion Planning and Trajectory Tracking in Complex Environments Based on Bézier Curves and Nonlinear MPC Controller

Safe Chance-constrained Model Predictive Control under Gaussian Mixture Model Uncertainty

Collision Avoidance for Autonomous Vehicles Based on MPC with Adaptive APF

Risk-Averse Receding Horizon Motion Planning for Obstacle Avoidance using Coherent Risk Measures

Robot Safe Planning In Dynamic Environments Based On Model Predictive Control Using Control Barrier Function

Predictive Motion Planning for Autonomous Vehicles with Geometric Constraints Via Convex Optimization

A Collision-Free MPC for Whole-Body Dynamic Locomotion and Manipulation

Contingency Model Predictive Control for Linear Time-Varying Systems

MPC-Based Control of Autonomous Vehicles With Localized Path Planning for Obstacle Avoidance Under Uncertainties

OA-MPC: Occlusion-Aware MPC for Guaranteed Safe Robot Navigation with Unseen Dynamic Obstacles

Simultaneous Trajectory Planning and Tracking Using an MPC Method for Cyber-Physical Systems: A Case Study of Obstacle Avoidance for an Intelligent Vehicle

Crash Mitigation in Motion Planning for Autonomous Vehicles

A Robust Mpc Approach for Platooning Control of Automated Vehicles with Constraints on Acceleration