Abstract:Radio frequency-orbital angular momentum (RF-OAM) is a novel approach of multiplexing a set of orthogonal modes on the same frequency channel to achieve high spectrum efficiencies. Since OAM requires precise alignment of the transmit and the receive antennas, the electronic beam steering approach has been proposed for the uniform circular array (UCA)-based OAM communication system to circumvent large performance degradation induced by small antenna misalignment in practical environment. However, in the case of large-angle misalignment, the OAM channel capacity can not be effectively compensated only by the electronic beam steering. To solve this problem, we propose a hybrid mechanical and electronic beam steering scheme, in which mechanical rotating devices controlled by pulse width modulation (PWM) signals as the execution unit are utilized to eliminate the large misalignment angle, while electronic beam steering is in charge of the remaining small misalignment angle caused by perturbations. Furthermore, due to the interferometry, the receive signal-to-noise ratios (SNRs) are not uniform at the elements of the receive UCA. Therefore, a rotatable UCA structure is proposed for the OAM receiver to maximize the channel capacity, in which the simulated annealing algorithm is adopted to obtain the optimal rotation angle at first, then the servo system performs mechanical rotation, at last the electronic beam steering is adjusted accordingly. Both mathematical analysis and simulation results validate that the proposed hybrid mechanical and electronic beam steering scheme can effectively eliminate the effect of diverse misalignment errors of any practical OAM channel and maximize the OAM channel capacity.

UCA Based OAM Beam Steering with High Mode Isolation

Hybrid Mechanical and Electronic Beam Steering for Maximizing OAM Channel Capacity

UCA-based Orbital Angular Momentum Radio Beam Generation and Reception under Different Array Configurations

Performance Analyses of the Radio Orbital Angular Momentum Steering Technique Based on Ka-Band Antenna

Realization of Beam Steering Based on Plane Spiral Orbital Angular Momentum Wave

Experiment of ka-band orbital angular momentum steering technique

Low Side-lobe High-Mode OAM Beam Generation Technique Based on Concentric Ring Array

Orbital Angular Momentum Beamforming Based on Multi-Loop Uniform Circular Array with Interferometry Codes

Structured Beamforming Based on Orbital Angular Momentum Mode-Group

Achieving Practical OAM Based Wireless Communications With Misaligned Transceiver

Experimental Array for Generating Dual Circularly-Polarized Dual-Mode OAM Radio Beams

An Optimized Scheme for Optical Phased Array Beam Steering Controlled by Wavelength

Multiplexed Millimeter Wave Communication with Dual Orbital Angular Momentum (OAM) Mode Antennas

Beam steering using delays generated from an optical OAM mode shifting recirculating loop

Reconfigurable Intelligent Surface Aided Non-Coaxial OAM Transmission for Capacity Improvement.

Wide‐angle Beam Steering Achieved by an Array‐fed Phase Reconfigurable Metasurface

Optical Steering of a Phased‐array Antenna Based on Fast Delay‐line Switches

Simultaneous Demultiplexing and Steering of Multiple Orbital Angular Momentum Modes

Dual-Axis Beam-Steering OPA with purely Passive Phase Shifters

An Orbital Angular Momentum-Based In-Band Full-Duplex Communication System and Its Mode Selection

OAM Beam Deflection Control Based on Tensor Impedance Holographic Metasurface