Abstract:Different mathematical models can be developed to represent the dynamic behavior of structural systems and assess properties, such as risk of failure and reliability. Selecting an adequate model requires choosing a model of sufficient complexity to accurately capture the output responses under various operational conditions. However, as model complexity increases, the functional relationship between input parameters varies and the number of parameters required to represent the physical system increases, reducing computational efficiency and increasing modeling difficulty. The process of model selection is further exacerbated by uncertainty introduced from input parameters, noise in experimental measurements, numerical solutions, and model form. The purpose of this research is to evaluate the acceptable level of uncertainty that can be present within numerical models, while reliably capturing the fundamental physics of a subject system. However, before uncertainty quantification can be performed, a sensitivity analysis study is required to prevent numerical ill-conditioning from parameters that contribute insignificant variability to the output response features of interest. The main focus of this paper, therefore, is to employ sensitivity analysis tools on models to remove low sensitivity parameters from the calibration space. The subject system in this study is a modular spring-damper system integrated into a space truss structure. Six different cases of increasing complexity are derived from a mathematical model designed from a two-degree of freedom (2DOF) mass spring-damper that neglects single truss properties, such as geometry and truss member material properties. Model sensitivity analysis is performed using the Analysis of Variation (ANOVA) and the Coefficient of Determination R2. The global sensitivity results for the parameters in each 2DOF case are determined from the R2 calculation and compared in performance to evaluate levels of parameter contribution. Parameters with a weighted R2 value less than .02 account for less than 2% of the variation in the output responses and are removed from the calibration space. This paper concludes with an outlook on implementing Bayesian inference methodologies, delayed-acceptance single-component adaptive Metropolis (DA-SCAM) algorithm and Gaussian Process Models for Simulation Analysis (GPM/SA), to select the most representative mathematical model and set of input parameters that best characterize the system’s dynamic behavior.

Reducing black-box nonlinear state-space models: A real-life case study

State Estimation For Nonlinear Systems By Using Dynamic Optimization

Pseudospectral expansion-based model reduction for control and boundary observation of unstable parabolic partial differential equations

Model order reduction of deep structured state-space models: A system-theoretic approach

Nonlinear Recursive Minimum Model Error Estimation

Data-driven Design of Well-Behaved Nonlinear Structures: A Case Study on the Von Mises Truss

Koopman-Based Approach to Non-intrusive Projection-Based Reduced-Order Modeling with Black-Box High-Fidelity Models. Part II: Application

On the reduction of Linear Parameter-Varying State-Space models

Nonlinear Model Order Reduction via Lifting Transformations and Proper Orthogonal Decomposition

Two-stage model reduction approaches for the efficient and certified solution of parametrized optimal control problems

A local basis approximation approach for nonlinear parametric model order reduction

Online Joint State Inference and Learning of Partially Unknown State-Space Models

Model reduction of coupled systems based on non-intrusive approximations of the boundary response maps

Sampling-free parametric model reduction for structured systems

Data-driven model reduction via non-intrusive optimization of projection operators and reduced-order dynamics

Applying Uncertainty Quantification to Structural Systems: Parameter Reduction for Evaluating Model Complexity

Automatic Decoupling and Index-aware Model-Order Reduction for Nonlinear Differential-Algebraic Equations

Separable Nonlinear Least-Squares Parameter Estimation for Complex Dynamic Systems

Data-driven Nonlinear Model Reduction using Koopman Theory: Integrated Control Form and NMPC Case Study

Application of a Novel Model Reduction Technique to the Assessment of Boundedness/Stability of Some Delay Time-Varying Vector Nonlinear Systems

Data-driven modeling and parameter estimation of Nonlinear systems