Abstract:An optimal solution to the task-space tracking problem using a non-redundant manipulator is proposed. This is a recurring occurrence in automated manufacturing settings, e.g. welding, deburring, painting, or quality control inspections. Given a pre-defined path for the end-effector to follow, there may not exist a joint-space continuous solution for task-space tracking when the non-linear manipulator kinematics and collision avoidance with obstacles in the workcell are considered. This introduces undesirable manipulator reconfigurations where the end-effector is required to deviate temporarily from the pre-defined path. The unwanted motion results in pausing task-space tracking, often incurring not only ineffective time and energy demands but potentially compromising the quality of the task at hand due to the additional discontinuities. An algorithm is proposed that provides a globally optimal perspective to the choice of suitable joint-space connected segments so that the minimum number of manipulator reconfigurations during task-space tracking is guaranteed. By carefully selecting the inverse kinematic solutions, all sequences ensuring minimum reconfigurability are proven collected by Dynamic Programming. Moreover, a faster greedy strategy is suggested to increase the computational efficiency of the tracker whilst still preserving global optimality and completeness. The effectiveness of the proposed algorithm is validated against traditional sampling-based solvers in simulation and illustrated on challenging real-world tracking experimentation with a Universal Robotics manipulator and a curved-surface object, depicted also in an accompanying video. An open-source implementation has also been provided for the benefit of the robotics community.

Task-Space Trajectory Tracking Control for Coordinated Manipulation Using Sampled Coupling Data

Task-space Cooperative Tracking Control of Networked Manipulators with Uncertain Kinematics and Dynamics

Precision Synchronization Motion Trajectory Tracking Control of Multiple Pneumatic Cylinders

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

A Haptic Shared Control Architecture for Tracking of a Moving Object.

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

Adaptive task‐space cooperative tracking control for manipulators with a desired trajectory estimator and a velocity observer

Task-space Fully Distributed Tracking Control of Networked Uncertain Robotic Manipulators Without Velocity Measurements

Task-space coordinated tracking of multiple heterogeneous manipulators via controller-estimator approaches

Trajectory coordination for a cooperative multi-manipulator system and dynamic simulation error analysis

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Adaptive Synchronous Tracking Control for N-Ppps Redundantly Actuated Distributed Parallel Manipulators with Dynamic Uncertainties

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Synchronization tracking control of networked multi-axis motion systems: A cooperative distributed model predictive control approach

Distributed Coordination of Networked Manipulators: A Two-Layer Control Scheme

Model-free Adaptive Trajectory Tracking Control of Robotic Manipulators with Practical Prescribed-Time Performance

Dynamics and Control of Noncooperative Space Target Capture Using a Flexible Manipulator

Data-Driven Model Predictive Control for Trajectory Tracking With a Robotic Arm

Unified Method for Task-Space Motion/Force/Impedance Control of Manipulator With Unknown Contact Reaction Strategy

Task-Space Consensus of Networked Robotic Systems: Separation and Manipulability