Abstract:In this work, a nanosecond pulsed plasma has been developed and utilized for the degradation of SF6 in a packed‐bed discharge reactor under different dilution gases. The RSM‐BBD model was used to optimize key process parameters in terms of degradation efficiency and energy yield. This work is expected to provide an effective technique for optimizing the degradation performance of SF6 at atmospheric pressure and ambient temperature. In this work, a nanosecond pulsed packed‐bed discharge (PBD) plasma was developed for SF6 degradation under different dilution gases. The discharge form transfers from filamentary discharge to the combination of surface discharge and microdischarge after introducing the packing material regardless of the dilution gas used, and the local electric field strength and SF6 degradation performance are promoted. The mean electron energy and rate coefficient for SF6 excitation in SF6/Ar system are significantly higher than those in SF6/N2 or SF6/air system, which results in higher SF6 degradation efficiency in SF6/Ar system. Moreover, the response surface methodology based on the Box–Behnken design model was constructed to optimize several key process parameters including pulsed voltage, gas flow rate, oxygen content, and relative humidity, as well as assess the contribution of each parameter to SF6 degradation. The proposed optimization model shows a satisfactory correlation between the predicted and the experimental results. The energy yield concerning SF6 degradation in nanosecond pulsed PBD plasma achieves approximately 75.3 g/kWh with nearly complete degradation. This work is expected to provide an efficient and energy‐saving plasma technique for SF6 degradation.

Process optimization of nanosecond pulsed packed‐bed discharge plasma for SF6 degradation based on response surface methodology

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

An Energy Efficient Process for Degrading Perfluorooctanoic Acid (PFOA) Using Strip Fountain Dielectric Barrier Discharge Plasma

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Mechanism and Reactive Species in a Fountain-Strip DBD Plasma for Degrading Perfluorooctanoic Acid (PFOA)

A Study on the Efficient Degradation of Sulfur Hexafluoride by Pulsed Dielectric Barrier Discharge Synergistic Active Gas

Simulation and experimental study on the degradation of the greenhouse gas SF6 by thermal plasma

Destruction of n -hexane from the air stream by pulsed discharge plasma: Modelling and key process parameters optimization by CCD-RSM

Application of Response Surface Methodology for the Optimization of Operating Conditions of a Self‐Pulsing Discharge (SPD) Plasma Reactor for the Degradation of Perfluorooctanoic Acid (PFOA) in Water

An Integrated Approach to Understanding the Mass Transfer and Reaction Processes in a Pulsed High-Voltage Discharge Reactor

Degradation of Methylene Blue by Dielectric Barrier Discharge Plasma Coupled with Activated Carbon Supported on Polyurethane Foam

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Degradation of Methylene Blue Via Dielectric Barrier Discharge Plasma Treatment

Experimental research and reaction process analysis of degradation of strong greenhouse gas SF6 using 304 stainless steel

The enhancing energy efficiency of sulfadiazine degradation using a DBD-contact plasma treatment process

Degradation of sulfadiazine in a cyclic V-SDBD plasma system: Parameters analysis and degradation pathway

Optimization of CO2 Conversion in a Cylindrical Dielectric Barrier Discharge Reactor Using Design of Experiments

Plasma Discharge Process in a Pulsed Diaphragm Discharge System

Study on the Performance Degradation of an Ejected-Plasma-Triggered SF<inf>6</inf> Gas Gap for 10-kV Smart Distribution Network

Characterization of a novel volume-surface DBD reactor: discharge characteristics, ozone production and benzene degradation