Abstract:Soft supramolecular materials are promising for the design of innovative and highly tunable adhesives. These materials are composed of polymer chains functionalized by strongly interacting moieties, sometimes called "stickers". In order to systematically investigate the effect of the presence of associative groups on the debonding properties of a supramolecular adhesive, a series of supramolecular model systems has been characterized by probe-tack tests. These model materials, composed of linear and low dispersity poly(butylacrylate) chains functionalized in the middle by a single tri-urea sticker, are able to self-associate by six hydrogen bonds and range in molecular weight (M n) between 5 and 85 kg/mol. The linear rheology and the nanostructure of the same materials (called "PnBA3U") was the object of a previous study 1,2. At room temperature, the association of polymers via hydrogen bonds induces the formation of rod-like aggregates structured into bundles for M n \textless{} 40kg/mol and the behavior of a soft elastic material was observed (G'\textgreater{}\textgreater{}G "and G'~$\omega$ 0). For higher M n , the filaments were randomly oriented and polymers displayed a crossover towards viscous behavior although terminal relaxation was not reached in the experimental frequency window. All these materials show however similar adhesive properties characterized by a cohesive mode of failure and low debonding energies (W adh \textless{}40J/m 2 for a debonding speed of 100$\mu$m/s). The debonding mechanisms observed during the adhesion tests have been investigated in detail with an Image tools analysis developed by our group 3. The measure of the projected area covered by cavities growing in the adhesive layer during debonding can be used to estimate the true stress in the walls of the cavities and thus, to characterize the in-situ large strain deformation of the thin layer during the adhesion test itself. This analysis revealed in particular that the PnBA3U materials with M n \textless{} 40 kg/mol soften very markedly at large deformation like yield stress fluids, explaining the low adhesion energies measured for these viscoelastic gels. 2

Adhesion between a viscoelastic material and a solid surface

Nonlinear Viscoelastic Modeling of Adhesive Failure for Polyacrylate Pressure-Sensitive Adhesives

On the effective surface energy in viscoelastic Hertzian contacts

Rate-dependent adhesion of viscoelastic contacts. Part II: numerical model and hysteresis dissipation

Bulk and fracture process zone contribution to the rate-dependent adhesion amplification in viscoelastic broad-band materials

Adhesive contact mechanics of viscoelastic materials

Fracture and adhesion of soft materials: a review

Peeling an elastic film from a soft viscoelastic adhesive: experiments and scaling laws

On the long and short-range adhesive interactions in viscoelastic contacts

Debonding of a soft adhesive fibril in contact with an elastomeric pillar

Dependence of Adhesive Friction on Surface Roughness and Elastic Modulus

Role of viscoelasticity in the adhesion of mushroom-shaped pillars

Adhesion and non-linear rheology of adhesives with supramolecular crosslinking points

Mechanics of adhesive failure. II

Adhesive Failure of Model Acrylic Pressure Sensitive Adhesives

Morphology and stability of droplets sliding on soft viscoelastic substrates

Singular dynamics in the failure of soft adhesive contacts

(21238) 1995 WV7: A New Basaltic Asteroid Outside the 3:1 Mean Motion Resonance

Friction of Polymers: from PDMS Melts to PDMS Elastomers