Abstract:The coating of the fibrous skeleton of luffa cylindrica (LC) with polyaniline (PANI) was carried out by in-situ polymerization of aniline. A thin PANI layer in its emeraldine-salt form (ES) got bound on to the LC surface, as revealed by the green color the latter developed, procuring more roughness to the luffa fibers. The surfaces of both materials, i.e. the purified original luffa (LC) and the PANI-coated luffa (PANI/LC) were characterized by FTIR, completed by the Raman range, SEM/EDX and XRD. In particular, the presence of N–H moieties in the FTIR spectrum and the appearance of the following bands: C = N stretching of the quinoid di-imine units, C = C stretching of the quinoid ring and C–N.+ band of the radical-cation in the Raman spectrum confirmed the effectiveness of the coating of LC. Dedoping, as determined by solid addition method, completed at around pH 9.5. After characterization, PANI/LC was tested for its capacity to adsorb hexavalent chromium anionic species. First, the emergence of the chromium characteristic peak in the EDX spectrum brought experimental evidence for the effective sorption of chromium onto the PANI/LC surface. Then, the novel material displayed a high efficiency to retain the metallic pollutant, going up to ~ 300 mg.g−1. Thus, after the PANI-grafting, this light and cheap agricultural by-product should compete advantageously with commercial anionic exchangers, at least in terms of efficiency. Besides, adsorption parameters were examined. The Cr(VI) uptake process was found to follow second order kinetics, with a pseudo-second order rate constant equal to 0.7144 × 10–3 g.mg−1.min−1. At the lower end of concentrations, the adsorption efficiency decreased with increasing temperature. The computed thermodynamic parameters (namely ΔH°, ΔS° and ΔG°) indicate that adsorption is exothermic, with an unfavourable entropy change, and confirm its spontaneity. None of some classical models fitted the equilibrium sorption data, a result that expresses the sorption mechanism complexity.

Facile synthesis of hydroxyl- and amine-riched porous polymer for indium recovery in water

Removal of Indium Ions from Aqueous Solutions Using Hydroxyapatite and Its Two Modifications

Activated carbon-hybridized and amine-modified polyacrylonitrile nanofibers toward ultrahigh and recyclable metal ion and dye adsorption from wastewater

Stable organicinorganic hybrid of polyaniline/α-zirconium phosphate for efficient removal of organic pollutants in water environment

Synthesis and study of low-cost nitrogen-rich porous organic polyaminals for efficient adsorption of iodine and organic dye

Anchoring ZIF-67 particles on amidoximerized polyacrylonitrile fibers for radionuclide sequestration in wastewater and seawater

Large-scale Preparation of Indium-Based Infinite Coordination Polymer Hierarchical Nanostructures and Their Good Capability for Water Treatment.

Hyper-Cross-Linked Polyindole for Selective Adsorption and Resource Utilization of Organic Pollutants in Water

Recovery of Ag(I) from aqueous solution by hyperbranched polyethyleneimine grafted polyacrylonitrile/graphene oxide electrospun nanocomposite fiber membrane for catalytic reduction of toxic P-nitrophenol

Synthesis, characterization and environmental application of an original adsorbent: polyaniline-coated luffa cylindrica

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Synthesis of a Novel Zwitterionic Hypercrosslinked Polymer for Highly Efficient Iodine Capture from Water

Polyelectrolyte electrostatically self-assembled modified porous polyacrylonitrile nanofibers as adsorbents for anionic dye removal

Effective removal of Cr(VI) from solution by three-dimensional polyaniline loaded composite porous hydrogel

Polyaniline doping induced abundant active sites in orange peel as an efficient adsorbent material for water treatment

Insight into properties and reutilization potential of spent polyaniline adsorbents containing transition metals through DFT calculations

Fabrication of amino-functionalized silica hollow nanofibers for removal of heavy metal ions

Feasible fabrication of o -phenanthroline-based polymer adsorbent for selective capture of aqueous Ag(I)

A novel ZIF-8@IL-MXene/poly (N-isopropylacrylamide) nanocomposite hydrogel toward multifunctional adsorption

Preparation, Characterization and Application of a Novel Silane-Bridged Polyaniline/cotton Fiber Composite

Porous Aromatic Framework Modified Electrospun Fiber Membrane as a Highly Efficient and Reusable Adsorbent for Pharmaceuticals and Personal Care Products Removal