Abstract:This study aims to examine the 50/50 polypropylene/polyamide 6 (iPP/PA6) system molded under confined flow conditions, both in its original state and after being modified by two different interfacial agents. This study provides two main insights. Firstly, it focuses on a polymer blend close to phase inversion. Secondly, it investigates the impact of using two different types of interfacial agents (derived from polymer waste) to enhance the compatibility between iPP and PA6. Dynamic Mechanical Analysis (DMA) has been employed to achieve these objectives. It is important to note that the investigation of the 50/50 iPP/PA6 system is a crucial focus predicted in previous studies, where a series of mechanical properties were evaluated using Box–Wilson design of experiments (DOEs) over the whole compositional range on the iPP/PA6 binary system. Thus, two interfacial modifiers, namely succinic anhydride (SA)-grafted atactic polypropylene with terminal, side, and bridge SA grafts (aPP-SASA) and succinyl-fluoresceine (SF) with bridge succinic anhydride grafting atactic polypropylene (aPP-SFSA), were employed. The authors obtained and characterized these agents. The quantity of these agents used in the blend was identified as a critical coordinate in prior studies conducted by the authors. The processing method used, compression molding under confined conditions, was chosen to minimize any orientation effect on the emerging morphology. All characterization procedures were performed on samples processed by contour machining to retain the blend morphologies as they emerged from the processing stage. Results from WAXS and SAXS synchrotron tests concluded there were no changes in the crystal morphology of the iPP or the PA6 in the blends nor any co-crystallization process throughout the compositional range. These findings, and the long period fits on the PP crystalline phase for the fifty/fifty blends we are discussing, will support the present DMA study. Finally, the efficiency of these interfacial modifiers has been concluded, even in this unfavorable scenario.

Toughening Immiscible Polymer Blends: The Role of Interface-Crystallization-Induced Compatibilization Explored Through Nanoscale Visualization

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Effect of Mixing Protocol on Compatibilized Polymer Blend Morphology

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Concept of Reactive Compatibilizer-Tracer for Discovering Interfacial Reaction and Morphology Development for In-Situ Compatibilizing Blending Processes

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Reactive Nanoparticles Compatibilized Immiscible Polymer Blends: Synthesis of Reactive SiO2 with Long Poly(methyl methacrylate) Chains and the in Situ Formation of Janus SiO2 Nanoparticles Anchored Exclusively at the Interface.

Janus nanoparticles as efficient interface compatibilizer in blends of polylactide and elastomers: Importance of interfacial relaxation on toughening

Compatibilization and morphology development of immiscible ternary polymer blends

Compatibilization of Immiscible Polypropylene/Poly(methyl Methacrylate) Blends by Silica Particles with Janus and Random Component-Selective Grafts.

Predicting compatibilized polymer blend toughness

Interfacial Engineering of Polymer Blend with Janus Particle As Compatibilizer

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

Role of compatibilizer in multicomponent polymer mixtures under shear flow

Reactive Janus Particle Compatibilizer with Adjustable Structure and Optimal Interface Location for Compatibilization of Highly Immiscible Polymer Blends

Intermacromolecular Complexation in Solution and Complex Blends

A Dynamic Mechanical Analysis on the Compatibilization Effect of Two Different Polymer Waste-Based Compatibilizers in the Fifty/Fifty Polypropylene/Polyamide 6 Blend