Abstract:Heat exchangers are the apparatus which is widely used in various industries. They transmit heat among two or more fluid streams. Theoretical analysis done by Kern’s method has been done on Shell and tube heat exchanger with segmental baffle and then experimented in CFD to check Heat Transfer rate and pressure drop with varying number of baffles which is 6, 8 and 10, and by keeping all the rest of parameters constant. It is found that as the number of baffles increase heat transfer rate increases also pressure drop is increases significantly. To optimize model in next step, CFD analysis is has been done by varying baffle cut to 25%, 35% and 45% by keeping same number of baffles which found best in heat transfer rate in earlier Kern’s method. Other parameters like velocity, temperature, pressure and baffle numbers are kept constant. Results obtained from numerical solution are analysed extensively to get the effect of baffle cut on heat transfer rate and pressure drop on shell side. The pressing need of the heat exchanger industry, the tradeoff optimization between the pressure drop and the heat transfer coefficient has been studied to provide an idea to get effects of the change in two parameters, namely, baffle spacing and baffle cut simultaneously and observe how these two will affect the performance of an STHX. An attempt to find the optimum geometric configuration has been carried out with number of baffles. Increasing baffles for same length of shell and baffle cut increases from 25% to 35%, heat transfer rate increases. It is beneficial in elucidating that a higher heat transfer coefficient can be obtained for fewer baffles when coupled with the appropriate baffle cut. So selection of correct optimized shell and tube heat exchanger. The work is carried out for copper tube bundles and steel shell. So optimization of baffle cut with correct number of baffles and reduction in pressure drop studied with CFD tool.

A REVIEW ON CFD ANALYSIS OF EXHAUST HEAT EXCHANGER FOR OPTIMISING THERMOELECTRIC POWER GENERATION

A Review on Design and optimization of shell and tube heat exchanger by varying parameters

Heat transfer enhancement in double-pipe heat exchanger: A review

Analysis of the performance optimisation parameters of shell and tube heat exchanger using CFD

A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers

Compact heat exchangers – Design and optimization with CFD

CFD applications in various heat exchangers design: A review

Review on Factors Affecting Efficiency of Shell and Tube Heat Exchanger

A Numerical Approach to Study the Steady State Heat Transfer Characteristics of an Annular Porous Heat Exchanger

Thermodynamic and hydraulic design characteristics of the fin tube heat exchanger

Computational and statistical analysis on the U‐tube heat exchanger with different passes configuration: Taguchi method

Optimized Design of Shell and Tube Heat Exchanger with Segmental Baffles

Prediction of optimal dimensions and arrangements of circular tubes of a fin and tube heat exchanger for an improved thermal-hydraulic performance

CFD simulation for evaluation of optimum heat transfer rate in a heat exchanger of an internal combustion engine

A Review on Study of Shell and Tube Heat Exchanger

HEAT EXCHANGER DESIGN OPTIMISATION

Thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical fluids: A review

Numerical analysis and performance enhancement of compact heat exchanger using computational fluid dynamics

Flow and Heat Transfer Simulation Analysis of 3D Compact Heat Exchanger

Numerical Analysis of Flow Characteristics and Heat Transfer of High-Temperature Exhaust Gas Through Porous Fins

Experimental exergy and entransy analyses on designed and fabricated crossflow heat exchanger