Abstract:Digital microfluidics (DMF) is a platform that enables the automated manipulation of individual droplets of sizes ranging from nano- to microliter and can be coupled with numerous techniques, including colorimetry. However, although DMF electrode architecture is highly versatile, its integration with different analytical methods often requires either changes in sample access, top plate design, or the integration of supplementary equipment into the system. As an alternative to overcome these challenges, this study proposes a simple integration between paper-based analytical devices (PADs) and DMF for automated and eco-friendly sample processing aiming at the colorimetric detection of creatinine (an important biomarker for kidney disease) in artificial urine. Optimized and selective Jaffé reaction was performed on the device, and reaction products were delivered to the PAD, which was subsequently analyzed with a bench scanner. The optimal operational parameters on DMF were 45 s reaction time with circular mixing and capture of the image after 5 min. Under optimized conditions, a linear behavior was obtained for creatinine concentrations ranging from 2 to 32 mg dL-1, with limits of detection and quantitation equal to 1.4 mg dL-1 and 3.1 mg dL-1, respectively. For the concentration range tested, the relative standard deviation varied from 2.5 to 11.0%, considering four measurements per concentration. Creatinine-spiked synthetic urine samples were subjected to analysis via DMF-PAD and the spectrophotometric reference method. The concentrations of CR determined using both analytical techniques were close to the theoretical values, with the resultant standard deviations of 2-9% and 1-4% for DMF-PAD and spectrophotometry, respectively. Furthermore, the recovery values were within the acceptable range, with DMF-PAD yielding 96-108% and spectrophotometry producing 95-102%. Finally, the greenness levels of DMF-PAD and spectrophotometric methods were evaluated using the Analytical Greenness Metric software, in which 0.71 and 0.51 scores were obtained, respectively. This indicates that the proposed method presents a higher greenness level, mainly due to its miniaturized characteristic using a smaller volume of reagent and sample and the possibility of automation, thus reducing user exposure to potentially toxic substances. Therefore, the DMF-PADs demonstrated great potential for application in the clinical analysis of creatinine, aiding in routine tests by introducing an automated, simple, and environmentally friendly process.

An Eco-Friendly alternative for voltammetric determination of creatinine in urine sample using copper(II) immobilized on biochar

Electrochemical detection of creatinine on Cu/carbon paper electrodes obtained by physical vapor deposition

Smartphone-based Portable Photoelectrochemical Biosensing System for Point-of-care Detection of Urine Creatinine and Albumin

Molecularly imprinted polymer specific to creatinine complex with copper(II) ions for voltammetric determination of creatinine

Zwitterion-Functionalized Cuprous Oxide Nanoparticles for Highly Specific and Enzymeless Electrochemical Creatinine Biosensing in Human Serum

Pretreated Screen-Printed Carbon Electrode and Cu Nanoparticles for Creatinine Detection in Artificial Saliva

An Electrochemical Sensor Based on Cu-MOF-199@MWCNTs Laden with CuNPs for the Sensitive Detection of Creatinine

An innovative dual-signal electrochemical ratiometric determination of creatinine based on silver nanoparticles with intrinsic self-calibration property for bimetallic Prussian blue analogues

High aspect ratio copper nanowires modified screen-printed carbon electrode for interference-free non-enzymatic detection of serum creatinine in neutral medium

Non-Enzymatic Electrochemical Detection of Urine Creatinine Using Cobalt-Gold Bimetallic Nanoparticles

Biochar from sugarcane bagasse: Synthesis, characterization, and application in an electrochemical sensor for copper (II) determination

Ultrasensitive colorimetric detection of creatinine via its dual binding affinity for silver nanoparticles and silver ions

Integration of paper-based analytical devices with digital microfluidics for colorimetric detection of creatinine

Sensitive electrochemical detection of creatinine based on electrodeposited Molecular Imprinting Polymer modified screen printed carbon electrode

A copper oxide-ionic liquid/reduced graphene oxide composite sensor enabled by digital dispensing: Non-enzymatic paper-based microfluidic determination of creatinine in human blood serum

Point-of-care testing device platform for the determination of creatinine on an enzyme@CS/PB/MXene@AuNP-based screen-printed carbon electrode

A facile double-signal ratiometric sensor of creatinine based on silver nanoparticles/thionine acetate/Mxenes with intrinsic self-calibration property

High-Performance Electrochemical Creatinine Sensors Based on β-Lead Dioxide/Single-Walled Carbon Nanotube Electrodes

A Disposable Printed Amperometric Biosensor for Clinical Evaluation of Creatinine in Renal Function Detection

Voltametric Determination of Dopamine in Urine Samples Using Biochar-Modified Carbon Paste yielded from Spent Coffee Grounds

Picric acid capped silver nanoparticles as a probe for colorimetric sensing of creatinine in human blood and cerebrospinal fluid samples