Abstract:The cross-slot stagnation point flow is one of the benchmark problems in non-Newtonian fluid mechanics as it allows large strains to develop and can therefore be used for extensional rheometry measurements or, once instability arises, as a mixing device. In such a flow, beyond a critical value for which the ratio of elastic force to viscous force is high enough, elasticity can break symmetry even in the absence of significant inertial forces (i.e. creeping flow), which is an unwanted phenomenon if the device is to be used as a rheometer but beneficial from a mixing perspective. In this work, a passive control mechanism is introduced to the cross-slot by adding a cylinder at the geometric centre to replace the ‘free’ stagnation point with ‘pinned’ stagnation points at the surface of the cylinder. In the current modified geometry, effects of the blockage ratio (the ratio of the diameter of the cylinder to the width of the channel), the Weissenberg number (the ratio of elastic forces to viscous forces) and extensibility parameters ( $\unicode[STIX]{x1D6FC}$ and $L^{2}$ ) are investigated in two-dimensional numerical simulations using both the simplified Phan-Thien and Tanner and finitely extensible nonlinear elastic models. It is shown that the blockage ratio for fixed solvent-to-total-viscosity ratio has a stabilizing effect on the associated symmetry-breaking instability. The resulting data show that the suggested modification, although significantly changing the flow distribution in the region near the stagnation point, does not change the nature of the symmetry-breaking instability or, for low blockage ratio, the critical condition for onset. Using both numerical and physical experiments coupled with a supporting theoretical analysis, we conclude that this instability cannot therefore be solely related to the extensional flow near the stagnation point but it is more likely related to streamline curvature and the high deformation rates towards the corners, i.e. a classic ‘curved streamlines’ purely elastic instability. Our work also suggests that the proposed geometric modification can be an effective approach for enabling higher flow rates to be achieved whilst retaining steady symmetric flow.

Pattern Selection: Determined by Symmetry and Modifiable by Long-Range Effects

Enhanced Stability of Flows Through Contraction Channels: Combining Shape Optimization and Linear Stability Analysis

Pattern Selection: Nonsingular Saffman-Taylor Finger And Its Dynamic Evolution With Zero Surface Tension

On the selection of Saffman-Taylor viscous fingers for divergent flow in a wedge

Dynamical Systems approach to Saffman-Taylor fingering. A Dynamical Solvability Scenario

Interface-resolved Direct Numerical Simulations of the Interactions Between Neutrally Buoyant Spheroidal Particles and Turbulent Channel Flows

Spatial and temporal stability issues for interfacial flows with surface tension

A nonlinear differential approach to the Saffman-Taylor finger

Saffman-Taylor instability in a non-Brownian suspension: finger selection and destabilization

Removing the stiffness from interfacial flows with surface tension

Pattern formation of the three-layer Saffman-Taylor problem in a radial Hele-Shaw cell

Control of a purely elastic symmetry-breaking flow instability in cross-slot geometries

Energy-stable discretization of the one-dimensional two-fluid model

Two-interface and thin filament approximation in Hele--Shaw channel flow

Viscous Flows in Two Dimensions

Rigorous Results in Existence and Selection of Saffman-Taylor Fingers by Kinetic Undercooling

Equilibrium Configurations of a Symmetric Body Immersed in a Stationary Navier–Stokes Flow in a Planar Channel

Turbulent transition in a channel with superhydrophobic walls: the effect of roughness anisotropy

Kinetic description of flow detachment at a smooth micro-step: the near-free-molecular regime

A new prediction of wavelength selection in radial viscous fingering involving normal and tangential stresses