Abstract:The 20kt Liquid Scintillator (LS) JUNO detector is being constructed by the International Collaboration in China, with the primary goal of addressing the question of neutrino mass ordering (hierarchy). The main challenge for JUNO is to achieve a record energy resolution, ~3% at 1MeV of energy released in the LS, which is required to perform the neutrino mass hierarchy determination. About 20 000 large 20-inch PMTs with high Photon Detection Efficiency (PDE) and good photocathode uniformity will ensure an approximately 80% surface coverage of the JUNO detector. The JUNO collaboration is preparing equipment for the mass tests of all PMTs using 4 dedicated containers. This approach allows us to test 144 PMTs in parallel. The primary measurement in the container will be the PMT response to illumination of its photocathode by a low-intensity uniform light. Each of the 20 000 PMTs will undergo the container test. Additionally, a dedicated scanning system was constructed for sampled tests of PMTs that allows us to study the variation of the PDE over the entire PMT photocathode surface. The core of the scanning station is a rotating frame with 7 LED sources of calibrated short light flashes that are placed along the photocathode surface covering zenith angles from the top of a PMT to its equator. The collection efficiency of a large PMT is known to be very sensitive to the Earth Magnetic Field (EMF), therefore, understanding the necessary level of EMF suppression is crucial for the JUNO Experiment. A dark room with Helmholtz coils compensating the EMF components is available for these tests at a JUNO facility. The Hamamatsu R12860 20-inch PMT is a candidate for the JUNO experiment. In this article the container design and mass-testing method, the scanning setup and scanning method are briefly described and preliminary results for performance test of this PMT are reported.

The MINOS Light Injection Calibration System

A Light Calibration System for the ProtoDUNE-DP Detector

The magnetized steel and scintillator calorimeters of the MINOS experiment

MINOS Results, Progress and Future Prospects

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

Laser calibration system in JUNO

Calibration of the Scintillation Timing in SNO+ using In-Situ Backgrounds

Double Calorimetry System in JUNO

The JUNO Calibration System

Prepared for submission to JINST Laser Calibration System in JUNO

A laserball calibration device for the SNO+ scintillator phase

MINOS neutrino oscillation results

DISCO: An optical instrument to calibrate neutrino detection in complex media

The JUNO Calibration Strategy and Simulation

The MiniBooNE Detector

Characterization of Silicon-Photomultipliers for a Cosmic Muon Veto detector

Mass testing of SiPMs for the CMVD at IICHEP

Calibration of the highly segmented SoLid antineutrino detector

Large photocathode 20-inch PMT testing methods for the JUNO experiment

The low-temperature energy calibration system for the CUORE bolometer array