Static charged perfect fluid spheres in general relativity

B.V.Ivanov

DOI: https://doi.org/10.1103/PhysRevD.65.104001

2002-03-21

Abstract:Interior perfect fluid solutions for the Reissner-Nordstrom metric are studied on the basis of a new classification scheme. General formulas are found in many cases. Explicit new global solutions are given as illustrations. Known solutions are briefly reviewed.

General Relativity and Quantum Cosmology

What problem does this paper attempt to address?

Viscous flow passing a small obstacle with non-zero velocity at infinity

Xiaoguang You

DOI: https://doi.org/10.3934/dcds.2024166

2024-12-10

Discrete and Continuous Dynamical Systems

Abstract:In this paper, we consider the incompressible Navier-Stokes equations in the exterior of a rigid obstacle in (d = 2, 3). For the case that the velocity vanishes at infinity, it is well-known that the Navier-Stokes equations have a Leray-Hopf weak solution with initial data in . Moreover, Iftimie et al. [8] proved that, as the viscosity and the size of the obstacle both tend to zero, the limit flow satisfies the Euler equations in the whole space. The purpose here is to extend the analysis to the case that the velocity does not vanish at infinity. We prove that the system in this case has a global weak solution, and the convergence to the Euler equations happens likewise when the viscosity and the size of the obstacle both vanish.

mathematics, applied
On the steady motion of Navier-Stokes flows past a fixed obstacle in a three-dimensional channel under mixed boundary conditions

Gianmarco Sperone

DOI: https://doi.org/10.48550/arXiv.2008.08105

2020-08-20

Abstract:We analyze the steady motion of a viscous incompressible fluid in a three-dimensional channel containing an obstacle through the Navier-Stokes equations with mixed boundary conditions: the inflow is given by a fairly general datum and the flow is assumed to satisfy a constant traction boundary condition on the outlet, together with the standard no-slip assumption on the obstacle and on the remaining walls of the domain. Explicit bounds on the inflow velocity guaranteeing existence and uniqueness of such steady motion are provided after estimating some Sobolev embedding constants and constructing a suitable solenoidal extension of the inlet velocity through the Bogovskii formula. A quantitative analysis of the forces exterted by the fluid over the obstacle constitutes the main application of our results: by deriving a volume integral formula for the drag and lift, explicit upper bounds on these forces are given in terms of the geometrical constraints of the domain.

Analysis of PDEs,Mathematical Physics,Functional Analysis
Singular limit of 2D second grade fluid past an obstacle

Xiaoguang You,Aibin Zang

DOI: https://doi.org/10.1007/s10473-023-0319-9

2021-11-09

Abstract:In this paper, we consider the 2D second grade fluid past an obstacle satisfying the standard non-slip boundary condition at the surface of the obstacle. Second grade fluid model is a well-known non-Newtonian model, with two parameters: $\alpha$ representing length-scale, while $\nu > 0$ corresponding to viscosity. We prove that, under the constraint condition $\nu = {o}(\alpha^\frac{4}{3})$, the second grade fluid with a suitable initial velocity converges to the Euler fluid as $\alpha$ tends to zero. Moreover, we estimate the convergence rate of the solution of second grade fluid equations to the one of Euler fluid equations as $\nu$ and $\alpha$ approach zero.

Analysis of PDEs
Inverse mean curvature flow with outer obstacle

Kai Xu

2024-05-24

Abstract:We develop a new boundary condition for the weak inverse mean curvature flow, which gives canonical and non-trivial solutions in bounded domains. Roughly speaking, the boundary of the domain serves as an outer obstacle, and the evolving hypersurfaces are assumed to stick tangentially to the boundary upon contact. In smooth bounded domains, we prove an existence and uniqueness theorem for weak solutions, and establish $C^{1,\alpha}$ regularity of the level sets up to the obstacle. The proof combines various techniques, including elliptic regularization, blow-up analysis, and certain parabolic estimates. As an analytic application, we address the well-posedness problem for the usual weak inverse mean curvature flow, showing in a broad generality that the initial value problem always admits a unique maximal (or innermost) weak solution.

Differential Geometry,Analysis of PDEs
Gauss curvature flow with shrinking obstacle

Ki-Ahm Lee,Taehun Lee

2023-10-04

Abstract:We consider a flow by powers of Gauss curvature under the obstruction that the flow cannot penetrate a prescribed region, so called an obstacle. For all dimensions and positive powers, we prove the optimal curvature bounds of solutions and all time existence with its long time behavior. We also prove the $C^1$ regularity of free boundaries under a uniform thickness assumption.

Differential Geometry,Analysis of PDEs
Steady three-dimensional unbounded flow past an obstacle continuously deviating from a sphere to a cube

Layal Jbara,Arthur Ghigo,Anthony Wachs

DOI: https://doi.org/10.1063/5.0133499

IF: 4.6

2023-01-01

Physics of Fluids

Abstract:We perform three-dimensional particle resolved direct numerical simulations of the flow past a non-spherical obstacle by a Finite Volume cut-cell method, a sub-class of non-body-conforming methods that provides a sharp description of the boundary, which is strictly mass and momentum conservative and can be easily extended to adaptive grids. The present research work discusses the effect of corner rounding and the incidence angle for a range of Reynolds numbers for which the flow exhibits a steady-state behavior. The obstacle is placed in a large cubic domain that properly models an unbounded domain. Hierarchically refined Cartesian meshes are used where the obstacle resides at the finest level of the mesh hierarchy, thus ensuring that the resolution of the boundary layer and the wake of the obstacle is highly accurate, along with significantly reducing the number of grid cells and the computing time. Specifically, we characterize the drag force and the main features of the flow past a bluff obstacle transitioning in shape from spherical to cuboidal through a superquadric geometrical representation. A superquadric representation is suitable for our study since it preserves geometric isometry, and our analysis, thus, focusses on non-sphericity caused by the level of curvature. We investigate a range of Re from 10 to 150, which spans the flow from attached to symmetric and separated past five different obstacle shapes, with the corner radius of the curvature of [Formula: see text] and 0 placed at incidence angles of [Formula: see text] and [Formula: see text] with respect to the streamwise direction. In general, our results show that the obstacle bluffness increases with α and ζ i and this increase is more prominent at higher Re. Higher drag forces are a consequence of either higher viscous forces for more streamlined bodies and in less inertial regimes or higher pressure forces for more bluff bodies and in highly inertial regimes, depending on how the corners are contributing to the frontal and lateral surface areas.

mechanics,physics, fluids & plasmas
Impermeability through a perforated domain for the incompressible 2D Euler equations

Christophe Lacave,Nader Masmoudi

DOI: https://doi.org/10.48550/arXiv.1407.2792

2015-10-15

Abstract:We study the asymptotic behavior of the motion of an ideal incompressible fluid in a perforated domain. The porous medium is composed of inclusions of size $\varepsilon$ separated by distances $d_\varepsilon$ and the fluid fills the exterior. If the inclusions are distributed on the unit square, the asymptotic behavior depends on the limit of $\frac{d_{\varepsilon}}\varepsilon$ when $\varepsilon$ goes to zero. If $\frac{d_{\varepsilon}}\varepsilon\to \infty$, then the limit motion is not perturbed by the porous medium, namely we recover the Euler solution in the whole space. On the contrary, if $\frac{d_{\varepsilon}}\varepsilon\to 0$, then the fluid cannot penetrate the porous region, namely the limit velocity verifies the Euler equations in the exterior of an impermeable square. If the inclusions are distributed on the unit segment then the behavior depends on the geometry of the inclusion: it is determined by the limit of $\frac{d_{\varepsilon}}{\varepsilon^{2+\frac1\gamma}}$ where $\gamma\in (0,\infty]$ is related to the geometry of the lateral boundaries of the obstacles. If $\frac{d_{\varepsilon}}{\varepsilon^{2+\frac1\gamma}} \to \infty$, then the presence of holes is not felt at the limit, whereas an impermeable wall appears if this limit is zero. Therefore, for a distribution in one direction, the critical distance depends on the shape of the inclusions. In particular it is equal to $\varepsilon^3$ for balls.

Analysis of PDEs
High‐order Artificial Boundary Conditions for Ideal Axisymmetric Irrotational Flow Around 3D Obstacles

CX Zheng,HD Han

DOI: https://doi.org/10.1002/nme.467

IF: 3.021

2002-01-01

International Journal for Numerical Methods in Engineering

Abstract:In this paper the numerical solution for ideal irrotational incompressible flow around axisymmetric 3D obstacles is discussed with the artificial boundary method. By introducing an artificial boundary, we divide the exterior unbounded domain into a bounded part and an unbounded part. After setting up a proper artificial boundary condition, we get an approximate reduced problem defined on the bounded part. Both non-local and local artificial boundary conditions are designed. Numerical experiment is also presented, and its result demonstrates the effectiveness of these artificial boundary conditions. Copyright (C) 2002 John Wiley Sons, Ltd.
Simulation of flow around a thin, flexible obstruction by means of a deforming grid overlapping a fixed grid

Kunlun Liu,Hari Radhakrishnan,Victor H. Barocas

DOI: https://doi.org/10.1002/fld.1552

IF: 1.847

2008-01-01

International Journal for Numerical Methods in Fluids

Abstract:Abstract This paper presents a numerical method for simulation of coupled flows, in which the fluid interacts with a thin deformable solid, such as flows in cardiovascular valves. The proposed method employs an arbitrary Lagrangian–Eulerian (ALE) method for flow near the solid, embodied in the outflow domain in which the mesh is fixed. The method was tested by modelling a two‐dimensional channel flow with a neo‐Hookean obstacle, an idealization of the coupled flow near a cardiovascular valve. The effects of the Reynolds number and the dimensionless elastic modulus of the material on the wall shear stress, the size of the downstream reverse flows, and the velocity and pressure profiles were investigated. The deformation of the obstacle, the pressure drop across the obstacle, and the size of the top reverse flow increased as the Reynolds number increased. Conversely, increasing the elastic modulus of the obstacle decreased the deformation of the obstacle and the size of the top reverse flows, but did not affect the pressure drop across the obstacle over the range studied. Copyright © 2007 John Wiley & Sons, Ltd.

mechanics,physics, fluids & plasmas,computer science, interdisciplinary applications,mathematics
Small scales in inviscid limits of steady fluids

Yan Guo,Zhuolun Yang

2024-09-15

Abstract:In this article, we study the 2D incompressible steady Navier-Stokes equation in a channel $(-L,0)\times(-1,1)$ with the no-slip boundary condition on $\{Y = \pm 1\}$, and consider the inviscid limit $\varepsilon \to 0$. In the special case of Euler shear flow $(u_e(Y),0)$, we construct a steady Navier-Stokes solution for $\varepsilon \ll1$, $$\left\{ \begin{aligned} &u^\varepsilon \sim u_e + u_p + O(\sqrt{\varepsilon}),\\ &v^\varepsilon \sim h(Y) \exp\{Xu_e(Y)/\varepsilon\} + O(\sqrt{\varepsilon}), \end{aligned}\right. $$ where $u_p$ represents the classical Prandtl layer profile, and $h(Y)$ is an arbitrary smooth, compactly-supported function with small magnitude. While the classical Prandtl boundary layer $u_p$ exhibits a small scale of order $\sqrt{\varepsilon}$ in $Y$ near $Y = \pm 1$, the profile we construct reveals an $\varepsilon$ small scale of $Xu_e(Y)$ in the vertical velocity component.

Analysis of PDEs
Navier--Stokes flow in the exterior of a moving obstacle with a Lipschitz boundary

Tomoki Takahashi,Keiichi Watanabe

2024-02-08

Abstract:Consider the three-dimensional Navier--Stokes flow past a moving rigid body $\mathscr{O} \subset \mathbb{R}^3$ with prescribed translational and angular velocities, where $\mathscr{O}$ stands for a bounded Lipschitz domain. We prove that the solution to the linearized problem is governed by a $C_0$-semigroup on solenoidal $L^q$-vector spaces with the $L^q$-$L^r$ estimates provided that $|1/q-1/2|<1/6+\varepsilon$ with some $\varepsilon>0$, where $r \ge q$ may be taken arbitrary large. As an application, we prove the existence and uniqueness of global mild solutions to the Navier--Stokes problem if the translational and angular velocities as well as the initial are sufficiently small.

Analysis of PDEs
Optimal Control with Obstacle Avoidance for Incompressible Ideal Flows of an Inviscid Fluid

Alexandre Anahory Simoes,Anthony Bloch,Leonardo Colombo

2023-11-03

Abstract:It has been shown in previous works that an optimal control formulation for an incompressible ideal fluid flow yields Euler's fluid equations. In this paper we consider the modified Euler's equations by adding a potential function playing the role of a barrier function in the corresponding optimal control problem with the motivation of studying obstacle avoidance in the motion of fluid particles for incompressible ideal flows of an inviscid fluid From the physical point of view, imposing an artificial potential in the fluid context is equivalent to generating a desired pressure. Simulation results for the obstacle avoidance task are provided.

Mathematical Physics,Numerical Analysis,Optimization and Control
Time dependent gravity-capillary flows past an obstacle

P.A. Milewski,J.-M. Vanden-Broeck

DOI: https://doi.org/10.1016/s0165-2125(98)00021-3

IF: 2.174

1999-01-01

Wave Motion

Abstract:The evolution of free surface gravity-capillary flows past a submerged obstacle in a shallow water channel is studied. For weakly nonlinear waves, the problem is formulated as a forced fifth-order Korteweg-de Vries (KdV) equation for the free-surface profile. Solutions to the initial value problem for this equation are computed numerically. It is found that there is a wealth of steady and unsteady behaviors, and several regimes are identified by varying the Froude and Bond numbers. This generalizes previous calculations in the absence of surface tension.

physics, multidisciplinary,acoustics,mechanics
Vanishing Viscosity Limit of the Navier–Stokes Equations to the Euler Equations for Compressible Fluid Flow with Far Field Vacuum

Min Ding,Shengguo Zhu

DOI: https://doi.org/10.1016/j.matpur.2016.07.001

IF: 2.282

2017-01-01

Journal de Mathématiques Pures et Appliquées

Abstract:We prove the vanishing viscosity limit of the Navier Stokes equations to the Euler equations for a two-dimensional compressible isentropic flow in the whole space. It is shown that there exists a unique regular solution of compressible Navier Stokes equations with density-dependent viscosities, arbitrarily large initial data and far field vacuum, whose life span is uniformly positive in the vanishing viscosity limit. It is worth paying special attention to the fact that, introducing two different symmetric structures, we can also give some uniform estimates of p(gamma-1/2) and of u in H-3 and of del p/p in L-6 boolean AND D-1, which provide the convergence of the regular solution of the viscous flow to that of the inviscid flow in L-infinity ([0, T]; H-s') for any s' is an element of [2, 3) with a rate of is an element of(2(1-s'/3)). Moreover, our results can be extended to the two-dimensional shallow water equations after slight modifications. (C) 2016 Elsevier Masson SAS. All rights reserved.
Incompressible Jet Flow Past an Obstacle.

Jianfeng Cheng,Jinli Huang

DOI: https://doi.org/10.1137/22m1516646

IF: 2.071

2023-01-01

SIAM Journal on Mathematical Analysis

Abstract:This paper is concerned with the well-posedness of the incompressible jet flow issuing from a semi-infinitely long nozzle and moving around an obstacle. More precisely, we prove that one can find a differential pressure, such that there exists a unique solution to the incompressible jet flow, with the upper free boundary initiating smoothly from the endpoint of the nozzle wall and the lower free boundary initiating smoothly from the surface of the obstacle. Moreover, the nonexistence of a finite cavity between the cavity boundary and the obstacle is established. On another side, we obtain the optimal regularity at the detachment of the lower free boundary.
Diffusive Expansion of the Boltzmann equation for the flow past an obstacle

Yan Guo,Junhwa Jung

2024-10-30

Abstract:The exterior domain problem is essential in fluid and kinetic equations. In this paper, we establish the validity of the diffusive expansion for the Boltzmann equations to the Navier-Stokes-Fourier system up to the critical time in an exterior domain with non-zero passing flow. We apply the $L^3-L^6$ framework to the unbounded domain in this paper.

Analysis of PDEs
Global existence theorem for the three-dimensional isentropic compressible Navier-Stokes flow in the exterior of a rotating obstacle

Tuowei Chen,Yongqian Zhang

2021-01-01

Abstract: In this paper, we consider the initial-boundary value problem of three-dimensional isentropic compressible Navier-Stokes equations with rotating effect terms in an exterior domain with Navier-slip boundary condition and with far-field vacuum. This problem is related to the motion of the compressible viscous flow past a rotating obstacle. We establish the global existence and uniqueness of classical solutions, provided that the initial mass is small. The initial data and the angular velocity of the obstacle are allowed to have large oscillations.
Low Mach Number Limit and Far Field Convergence Rates of Irrotational Flows in Multidimensional Nozzles with an Obstacle Inside.

Lei Ma,Tian-Yi Wang,Chunjing Xie

DOI: https://doi.org/10.1137/22m1472553

IF: 2.071

2023-01-01

SIAM Journal on Mathematical Analysis

Abstract:In this paper, the low Mach number limit and far field convergence rates are investigated for steady irrotational flows with external forces in three-dimensional infinitely long nozzles with an obstacle inside. First, with the aid of uniform a priori estimates, we proved the well-posedness theory for both incompressible flows and compressible subsonic flows with external forces in a multidimensional nozzle with an obstacle inside. Furthermore, the uniformly subsonic compressible flows tend to the incompressible flows with quadratic order of Mach numbers as the compressibility parameter goes to zero. We finally give the convergence rates of both incompressible and compressible flows at far fields as the boundary of the nozzle goes to flat even when the forces do not admit convergence rates at far fields. These results reveal how the external forces affect the convergence rates of the flows at far fields.
Construction of the free-boundary 3D incompressible Euler flow under limited regularity

Mustafa Sencer Aydin,Igor Kukavica,Wojciech S. Ożański,Amjad Tuffaha

2023-07-05

Abstract:We consider the three-dimensional Euler equations in a domain with a free boundary with no surface tension. We construct unique local-in-time solutions in the Lagrangian setting for $u_0 \in H^{2.5+\delta }$ such that the Rayleigh-Taylor condition holds and $\mathrm{curl}\,u_0 \in H^{2+\delta }$ in an arbitrarily small neighborhood of the free boundary. We show that the result is optimal in the sense that $H^{3+\delta}$ regularity of the Lagrangian deformation near the free boundary can be ensured if and only if initial vorticity has $H^{2+\delta}$ regularity of vorticity near the free boundary.

Analysis of PDEs
On an obstacle problem for the Brakke flow with a generalized right-angle boundary condition

Katerina Nik,Keisuke Takasao

2024-04-05

Abstract:We study Brakke's mean curvature flow with obstacles and with a right-angle boundary condition. Assuming that the obstacles have $C^{1,1}$-boundaries we prove that a weak solution exists globally in time. To show the existence we apply the phase-field method and thus investigate the singular limit of the Allen-Cahn equation with forcing term and homogeneous Neumann bounday condition. We also construct sub- and supersolutions that correspond to the obstacles.

Analysis of PDEs

Static charged perfect fluid spheres in general relativity

Viscous flow passing a small obstacle with non-zero velocity at infinity

On the steady motion of Navier-Stokes flows past a fixed obstacle in a three-dimensional channel under mixed boundary conditions

Singular limit of 2D second grade fluid past an obstacle

Inverse mean curvature flow with outer obstacle

Gauss curvature flow with shrinking obstacle

Steady three-dimensional unbounded flow past an obstacle continuously deviating from a sphere to a cube

Impermeability through a perforated domain for the incompressible 2D Euler equations

High‐order Artificial Boundary Conditions for Ideal Axisymmetric Irrotational Flow Around 3D Obstacles

Simulation of flow around a thin, flexible obstruction by means of a deforming grid overlapping a fixed grid

Small scales in inviscid limits of steady fluids

Navier--Stokes flow in the exterior of a moving obstacle with a Lipschitz boundary

Optimal Control with Obstacle Avoidance for Incompressible Ideal Flows of an Inviscid Fluid

Time dependent gravity-capillary flows past an obstacle

Vanishing Viscosity Limit of the Navier–Stokes Equations to the Euler Equations for Compressible Fluid Flow with Far Field Vacuum

Incompressible Jet Flow Past an Obstacle.

Diffusive Expansion of the Boltzmann equation for the flow past an obstacle

Global existence theorem for the three-dimensional isentropic compressible Navier-Stokes flow in the exterior of a rotating obstacle

Low Mach Number Limit and Far Field Convergence Rates of Irrotational Flows in Multidimensional Nozzles with an Obstacle Inside.

Construction of the free-boundary 3D incompressible Euler flow under limited regularity

On an obstacle problem for the Brakke flow with a generalized right-angle boundary condition