Abstract:The new type of micro-pattern gaseous detector (MPGD) like the gas electron multiplier (GEM), features the advantage of good spatial resolution (sigma < 100 mu m). However, abundant and high density electronic channels are needed to obtain the high spatial resolution, which will lead to a great pressure on the detector construction, power consumption, spatial utilization, etc. The resistive anode readout method can help to obtain a good spatial resolution comparable to the pixel readout structure with an enormous reduction of the electronic channels. By using the thick film resistor technology, a new type of resistive structure, composed of high resistive square pad array with low resistive narrow border strips, is developed and applied to the readout anode of the triple GEM detector. For the resistive anode readout board used in the experiment, there are 6 x 6 resistive cells, which means that the detector needs only 49 electronics channels. To obtain a good spatial resolution, the cell size is set to be 6 mm x 6 mm. The surface resistivity of the pads and the strips are 150 k Omega/square and 1 k Omega/square, respectively. The performances of the detector, especially the two-dimensional imaging performance, are studied by using a Fe-55 (5.9 keV) source and an X ray tube (8 keV). The test results show that the spatial resolution of the detector is better than 80 mu m (sigma) by using the imaging of a 40 mu m wide slot, and the nonlinearity is better than 1.5% by the scanning along the x-axis of the readout board in the steps of 1 mm. Furthermore, quite a good two-dimensional imaging capability is achieved by the detector. These good performances of the detector show the feasibility of the resistive anode readout method for the GEM detector with large area and other detectors with similar structures in the two-dimensional imaging applications.

Developments and the preliminary tests of resistive GEMs manufactured by a screen printing technology

GEMs with Double Layred Micropattern Electrodes and their Applications

Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications

Preliminary Test of Thick GEM with Resistive Electrodes

Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes

First Tests of Gaseous Detectors Made of a Resistive Mesh

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers

Photosensitive Strip RETHGEM

Performances of RETGEM with Resistive Electrodes Made of Kapton Foils

Development and preliminary tests of resistive microdot and microstrip detectors

RETGEM with polyvinylchloride (PVC) electrodes

Study of the two dimensional imaging performance for the gas electron multiplier using the resistive anode readout method

Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications

A perturbative determination of O(a) boundary improvement coefficients for the Schrödinger Functional coupling at 1-loop with improved gauge actions

Advances in imaging THGEM-based detectors

Plasma-Based Etching Approach for GEM Detector Microfabrication at FBK for X-ray polarimetry in space

New designs of resistive microstrip gaseous detectors (R-MSGCs)

Thick GEM-like (THGEM) detectors and their possible applications

FETs Array Readout of GEM Detector