Abstract:The use of syngas as an alternative fuel in compression ignition engines is a potential way to curb the emission of pollutants and optimize the performance of these engines. The present research studied the effect of changing fuel injection timing and adding syngas on the output of a heavy-duty diesel engine. The optimal mode of the turbulence model, fuel spray model, combustion model, and pollutant emission model was used to solve computational fluid dynamics. Changing fuel injection timing from 70 to 10° before top dead center (BTDC) and diesel variants, including conventional diesel, diesel + 20% syngas, and diesel + 40% syngas, is the strategy studied here. It was found that the use of syngas could reduce emissions significantly. The in-cylinder mean effective pressure was the highest for diesel + 20% syngas. On the other hand, increasing the rate of syngas and retarding injection timing reduced the ignition period and in-cylinder temperature. The lowest rate of CO emission was obtained from diesel + 40% syngas at a fuel injection timing of 70° BTDC, whereas the lowest particulate matter emission was related to diesel + 40% syngas at 40° BTDC injection timing. The lowest rate of CO2 emission was related to diesel + 40% syngas at a fuel injection timing of 10° BTDC, while the same timing for conventional diesel exhibited the lowest NO X emission rate. Finally, the performance parameters of the engine including indicated power, indicated fuel consumption, and indicated thermal efficiency were decreased with the increase in syngas fraction, so that their highest values were obtained from the conventional diesel at the injection timing of 40° BTDC. In addition, an artificial neural network (ANN) model based on a standard back-propagation learning algorithm was developed for modeling the performance and emissions of the engine. The results for the optimum ANN model showed that the optimal ANN has two hidden layers with 20-25 neurons and the transfer function of logsig-logsig for hidden layers 1 and 2, respectively, and can predict different parameters of the engine for different modes. The correlation coefficients (R-value) of optimal topology for training, validation, and testing are 0.99992, 0.96612, and 0.93424, respectively. The results for the optimum ANN model showed that the constructed model sufficiently predicts the performance and emissions of the CI diesel engine.

Exploring the effect of coatings and ethanol-blended fuels on emission reduction: Experimental study and neural network approach

On the Use of Artificial Neural Networks to Model the Performance and Emissions of a Heavy-Duty Natural Gas Spark Ignition Engine

Experimental investigation and artificial neural network-based modelling of thermal barrier engine performance and exhaust emissions for methanol-gasoline blends

Sustainability and Environmental Impact of Ethanol and Oxyhydrogen Addition on Nanocoated Gasoline Engine

An Artificial Neural Network Model to Predict Efficiency and Emissions of a Gasoline Engine

A Study on Emission Characteristics of an Efi Engine with Ethanol Blended Gasoline Fuels

Effects of alcohol fuels on SACI engine and analyze of prediction of SACI engine performance by artificial neural networks

Artificial Neural Network-Based Prediction of Performances-Exhaust Emissions of Diesohol Piloted Dual Fuel Diesel Engine Under Varying Compressed Natural Gas Flowrates

Sustainability improvement of spark-ignition engine performance enhanced with nanoparticles and hydroxy gas

Environmental and performance impacts of 2-ethylhexyl nitrate and ethanol in diesel blends: A comprehensive study

The experimental and numerical investigation of biofuels on combustion and tribology characteristics in a compression ignition engine

Performance evaluation of low heat rejection diesel engine operated with biofuels under-selective catalytic reduction

Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine

Artificial Neural Network Modeling and Numerical Simulation of Syngas Fuel and Injection Timing Effects on the Performance and Emissions of a Heavy-Duty Compression Ignition Engine

Artificial neural network based forecasting of diesel engine performance and emissions utilizing waste cooking biodiesel

The Influence of Diesel–Ethanol Fuel Blends on Performance Parameters and Exhaust Emissions: Experimental Investigation and Multi-Objective Optimization of a Diesel Engine

Analysis of Performance Parameters of Engines with Spark Ignition with Variable Regulations of the Fuel-Injection System, Powered by E100 Fuel

An Experimental Study on the Emission Characteristics in CI Engine using Nano Particle Coated Catalytic Converter

Impact of thermal swing piston top land coatings on gasoline engine performance and raw emissions

Application of triple-branch artificial neural network system for catalytic pellets combustion

Effect of Different Ratios of Gasoline-Ethanol Blend Fuels on Combustion Enhancement and Emission Reduction in Electronic Fuel Injection Engine