Abstract:Background Cardiac applications in radiation therapy are rapidly expanding including magnetic resonance guided radiation therapy (MRgRT) for real‐time gating for targeting and avoidance near the heart or treating ventricular tachycardia (VT). Purpose This work describes the development and implementation of a novel multi‐modality and magnetic resonance (MR)‐compatible cardiac phantom. Methods The patient‐informed 3D model was derived from manual contouring of a contrast‐enhanced Coronary Computed Tomography Angiography scan, exported as a Stereolithography model, then post‐processed to simulate female heart with an average volume. The model was 3D‐printed using Elastic50A to provide MR contrast to water background. Two rigid acrylic modules containing cardiac structures were designed and assembled, retrofitting to an MR‐safe programmable motor to supply cardiac and respiratory motion in superior‐inferior directions. One module contained a cavity for an ion chamber (IC), and the other was equipped with multiple interchangeable cavities for plastic scintillation detectors (PSDs). Images were acquired on a 0.35 T MR‐linac for validation of phantom geometry, motion, and simulated online treatment planning and delivery. Three motion profiles were prescribed: patient‐derived cardiac (sine waveform, 4.3 mm peak‐to‐peak, 60 beats/min), respiratory (cos4 waveform, 30 mm peak‐to‐peak, 12 breaths/min), and a superposition of cardiac (sine waveform, 4 mm peak‐to‐peak, 70 beats/min) and respiratory (cos4 waveform, 24 mm peak‐to‐peak, 12 breaths/min). The amplitude of the motion profiles was evaluated from sagittal cine images at eight frames/s with a resolution of 2.4 mm × 2.4 mm. Gated dosimetry experiments were performed using the two module configurations for calculating dose relative to stationary. A CT‐based VT treatment plan was delivered twice under cone‐beam CT guidance and cumulative stationary doses to multi‐point PSDs were evaluated. Results No artifacts were observed on any images acquired during phantom operation. Phantom excursions measured 49.3 ± 25.8%/66.9 ± 14.0%, 97.0 ± 2.2%/96.4 ± 1.7%, and 90.4 ± 4.8%/89.3 ± 3.5% of prescription for cardiac, respiratory, and cardio‐respiratory motion profiles for the 2‐chamber (PSD) and 12‐substructure (IC) phantom modules respectively. In the gated experiments, the cumulative dose was <2% from expected using the IC module. Real‐time dose measured for the PSDs at 10 Hz acquisition rate demonstrated the ability to detect the dosimetric consequences of cardiac, respiratory, and cardio‐respiratory motion when sampling of different locations during a single delivery, and the stability of our phantom dosimetric results over repeated cycles for the high dose and high gradient regions. For the VT delivery, high dose PSD was <1% from expected (5–6 cGy deviation of 5.9 Gy/fraction) and high gradient/low dose regions had deviations <3.6% (6.3 cGy less than expected 1.73 Gy/fraction). Conclusions A novel multi‐modality modular heart phantom was designed, constructed, and used for gated radiotherapy experiments on a 0.35 T MR‐linac. Our phantom was capable of mimicking cardiac, cardio‐respiratory, and respiratory motion while performing dosimetric evaluations of gated procedures using IC and PSD configurations. Time‐resolved PSDs with small sensitive volumes appear promising for low‐amplitude/high‐frequency motion and multi‐point data acquisition for advanced dosimetric capabilities. Illustrating VT planning and delivery further expands our phantom to address the unmet needs of cardiac applications in radiotherapy.

TEAM participation in the irradiation of IROC phantoms for cooperative group clinical trials

Is the Imaging Radiation Oncology Core Head and Neck Credentialing Phantom an Effective Surrogate for Different Anatomic Sites?

An Anthropomorphic Head and Neck Quality Assurance Phantom for Credentialing of Intensity-Modulated Proton Therapy.

A multi-institutional trial evaluating the use of an integrated quality assurance phantom for frameless single-isocenter multitarget stereotactic radiosurgery

Intraoperative radiation therapy with 50 kV x‐rays: A multi‐institutional review

SU‐E‐T‐485: Clinical Evaluation of Inverse Planning Models and IMRT Delivery Systems in the Framework of AAPM TG‐119 Protocol

Evaluation of RADIANCE Monte Carlo algorithm for treatment planning in electron based Intraoperative Radiotherapy (IOERT)

3D printed heterogeneous paediatric head and adult thorax phantoms for linear accelerator radiotherapy quality assurance: from fabrication to treatment delivery

An external dosimetry audit programme to credential static and rotational IMRT delivery for clinical trials quality assurance

Implementation of proton therapy treatments with pencil beam scanning of targets with limited intrafraction motion

Dosimetric validation of intensity‐modulated bolus electron conformal therapy planning and delivery using an anthropomorphic cylindrical head phantom

Evaluation of a novel patient-specific quality assurance phantom for robotic single-isocentre, multiple-target stereotactic radiosurgery, and stereotactic radiotherapy

Evaluation of patient-specific quality assurance for fractionated stereotactic treatment plans with 6 and 10MV photon beams in beam-matched linacs

Development of 3D Dosimetry System Using Polymer Gel (TENOMAG) and Optical-CT Scanner in Prostate IMRT

Shaping success: clinical implementation of a 3D-printed electron cutout program in external beam radiation therapy

Development and first implementation of a novel multi‐modality cardiac motion and dosimetry phantom for radiotherapy applications

Design, construction, and dosimetry of 3D printed heterogeneous phantoms for synchrotron brain cancer radiation therapy quality assurance

Three dimensional reconstruction of therapeutic carbon ion beams in phantoms using single secondary ion tracks

Clinical commissioning of an adaptive radiotherapy platform: Results and recommendations

Commissioning and clinical implementation of an independent dose calculation system for scanned proton beams

Multi-institutional experimental validation of online adaptive proton therapy workflows