Poly(cyclosiloxane–carborane)s for harsh environments

Lihua Zhao,Tianhao Li,Bijie Wang,Ke Chen,Xiao Hu,Ming Liu,Liu He,Qing Huang,Yujie Song

DOI: https://doi.org/10.1039/d1py01323h

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:Heat resistant poly(cyclosiloxane–carborane)s resist oxidation and can be used for harsh environments.

polymer science

What problem does this paper attempt to address?

Recent advances in carborane-siloxane polymers

Jiaqi Sun,Muyao Gao,Lihua Zhao,Yangzhong Zhao,Tianhao Li,Ke Chen,Xiao Hu,Liu He,Qing Huang,Ming Liu,Yujie Song

DOI: https://doi.org/10.1016/j.reactfunctpolym.2022.105213

IF: 4.966

2022-04-01

Reactive and Functional Polymers

Abstract:The rapid development in aerospace, automobile, and chemical industry has put forward demands on polymeric materials which are able to maintain their structures and performance at high temperatures. Carborane-siloxane polymers are one of the candidates suitable for applications under harsh environments and have been widely investigated. This review introduces the recent advances, synthesis routes and properties of carborane-siloxane polymers. The origin and future potentials are all presented. The main characteristics and practical applications are also described.

engineering, chemical,chemistry, applied,polymer science
High-Temperature Resistant Polyborosilazanes with Tailored Structures

Bijie Wang,Ke Chen,Tianhao Li,Xun Sun,Ming Liu,Lingwei Yang,Xiao Hu,Jian Xu,Liu He,Qing Huang,Linbin Jiang,Yujie Song,Xiao (Matthew) Hu

DOI: https://doi.org/10.3390/polym13030467

IF: 5

2021-02-01

Polymers

Abstract:Boron-containing organosilicon polymers are widely used under harsh environments as preceramic polymers for advanced ceramics fabrication. However, harmful chemicals released during synthesis and the complex synthesis routes have limited their applications. To solve the problems, a two-component route was adopted to synthesize cross-linked boron-containing silicone polymer (CPBCS) via a solventless process. The boron content and CPBCSs’ polymeric structures could be readily tuned through controlling the ratio of multifunctional boron hybrid silazane monomers (BSZ12) and poly[imino(methylsilylene)]. The CPBCSs showed high thermal stability and good mechanical properties. The CPBCS with Si-H/C=C ratio of 10:1 showed 75 wt% char yields at 1000 °C in argon, and the heat release capacity (HRC) and total heat release (THR) are determined to be 37.9 J/g K and 6.2 KJ/g, demonstrating high thermal stability and flame retardancy. The reduced modulus and hardness of CPBCS are 0.30 GPa and 2.32 GPa, respectively. The novel polysilazanes can be potentially used under harsh environments, such as high temperatures or fire hazards.

polymer science
Synthesis of CO2-Derived, Siloxane-Functionalized Poly(ether Carbonate)s and Waterborne Polyurethanes

Zhongzhu Ma,Xianwei Zhang,Xiaojing Zhang,Numan Ahmed,Hong Fan,Jintao Wan,Carla Bittencourt,Bo-geng Li

DOI: https://doi.org/10.1021/acs.iecr.9b06795

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:Siloxane-functionalized poly(ether carbonate)s (Si-PECs) were synthesized from terpolymerization of carbon dioxide (CO2), propylene oxide (PO), and [3-(2,3-epoxypropoxy)propyl]-trimethoxysilane (KH-560). Si-PECs with different molecular weights (1500-4000 Da) and siloxane content (0-9.8% by mole) were obtained and used as the soft segments of waterborne polyurethane (WPU). The carbonate unit in polyols improved the mechanical and oxidation resistance of WPU, whereas the siloxane units offered higher cross-linking density and thermal stability. The particle size of the Si-PEC-WPU emulsion varied from 100 to 684 nm as the siloxane unit content in Si-PEC increased. Further, the Si-PEC-WPU film prepared from Si-PEC having an M-n of 2200 and a siloxane content of 3.9% by mole showed not only excellent mechanical performance with a tensile strength of 16.5 MPa and elongation at a break of 683.4% but also good hydrophobicity because of the carbonate units and siloxane units. To summarize, Si-PECs derived from CO2 and inexpensive silane coupling agents show good promise as an alternative for commodity polyols for WPU applications.
O-Carborane-containing Poly(siloxane-arylacetylene)s with Thermal and Thermo-Oxidative Stabilities

Yun Jiang,Xiaojie Li,Farong Huang,Yan Zhou,Lei Du

DOI: https://doi.org/10.1080/10601325.2015.1029373

2015-01-01

Abstract:A series of poly(siloxane-arylacetylene)s with o-carborane in the backbone (CB-PSOA)s were prepared by the coupling reaction between poly(siloxane-arylacetylene) (PSOA) and decaborane (B10H14) in the presence of CH3CN. CB-PSOAs were characterized by Fourier-transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). The results show that the average amount of carborane units in a CB-PSOA chain could be raised when the molar ratio of B10H14 to PSOA is increased from 0.6 to 2.4. The crosslinking reaction could be carried on at above 140 degrees C for CB-PSOAs. The CB-PSOA thermosets show excellent thermo oxidative stability with over 85% residue yield at 1000 degrees C in air.
Improved Wear Resistance and Environmental Adaptability of a Polysiloxane/Molybdenum Disulfide Composite Lubricating Coating Using Polyhedral Oligomeric Silsesquioxane

Zhicheng Zhao,Yanjun Ma,Pengfei Ju,Yanping Wu,Lei Chen,Huidi Zhou,Jianmin Chen

DOI: https://doi.org/10.1021/acsami.2c08485

2022-07-29

Abstract:Polysiloxane/molybdenum disulfide (MoS(2)) composite lubricating coatings that are used in low-earth orbit spacecraft have high resistance to atomic oxygen attack and outstanding vacuum tribological properties. However, their atmospheric environment wear resistance and adaptability under high humidity are poor. In this paper, octa-aminophenyl T8-polyhedral oligomeric silsesquioxane (NH(2)-POSS) was used to enhance their atmospheric wear resistance and environmental adaptability to increase the...

materials science, multidisciplinary,nanoscience & nanotechnology
Synthesis and Properties of Carborane/POSS Composites

Zhang Qiuhong,Huang Xin,Xi Kai,Jia Xudong,Gu Zhaozhan

DOI: https://doi.org/10.3969/j.issn.1007-2330.2013.01.013

2013-01-01

Abstract:Carborane is an outstanding raw material for high temperature resistant.POSS is an anti-atomic oxygen compound.In this paper,the above-mentioned two materials are chemically combined by hydrosilylation.Two kinds of polymers are synthesized and the thermal properties are evaluated by TGA in air.TGA results show that the materials exhibit excellent high-temperature resistant properties.These materials could be used as coatings of hypervelocity vehicles.
Anchoring Effect of Hyperbranched Carborane in Highly Cross-Linked Cyclosiloxane Networks toward High-Performance Polymers

Chongwen Yu,Tianhao Li,Xiao Hu,Ming Liu,Qing Huang,Liu He,Yujie Song

DOI: https://doi.org/10.1021/acs.macromol.3c00286

IF: 5.5

2023-05-22

Macromolecules

Abstract:High-performance polymers (HPPs) have good thermal and mechanical properties even under harsh environments and are widely used in aerospace, microelectronics, automobile, and other fields. Traditional employed highly cross-linked HPPs tend to fail in their performance at high temperatures due to the structural defects, which remains a challenge in both scientific investigation and engineering applications for decades. Herein, we employed a cyclosiloxane hybrid polymer (CHP) to investigate a new design strategy to compensate for the structural defects in the highly cross-linked network, which avoids catastrophic failure at high temperatures. Hyperbranched o-carborane was synthesized and used to compensate for structural defects of CHP. The antioxidant ability and toughness of CHP were improved, and it had better mechanical properties over a wide temperature range. Moreover, the anchoring effect of hyperbranched o-carborane in the cyclosiloxane network was systematically investigated. The hyperbranched o-carborane cage could stabilize the CHP network under dynamic thermal stress through anchoring the dangling bonds, and the highly cross-linked network suppressed the disintegration of the o-carborane cage by anchoring boron atoms of the o-carborane cage. Furthermore, the structural evolution mechanism of the o-carborane cage with increasing temperature was proposed. This fundamental research provided new insights into the design of HPPs for harsh environments.

polymer science
Oxidation behavior of carbon materials derived from a carborane- and silicon-incorporated polymer

Canfeng Wang,Farong Huang,Yun Jiang,Junfei Li,Yan Zhou,Lei Du

DOI: https://doi.org/10.1016/j.ceramint.2011.12.007

IF: 5.532

2012-01-01

Ceramics International

Abstract:The oxidation behavior and oxidation mechanism of carbon materials containing silicon and boron elements (C–Si–B materials) were investigated at different high temperatures in air. The carbon materials were prepared by oxidative pyrolysis of the polymer precursor, carborane-incorporated poly(dimethylsilylene-ethynylenephenyleneethynylene) (CB-PSEPE), at 800, 1000, or 1200°C for 1h under static air. Homogeneous dispersion of silicon and boron components in the carbon matrix could be achieved in the carbon materials after the pyrolysis. The oxidation behavior of the C–Si–B materials during the oxidation process was studied. The evolution of elemental composition and morphology of the surface layers of carbon materials was monitored by X-ray photoelectron spectroscopy and scanning electron microscopy, respectively. The results imply that the formation of protective borosilicate layer in the surface is the main mechanism to provide remarkable oxidation resistance of the carbon materials. The obtained borosilicate layer with a self-healing property can withstand oxidation at 1000°C in air.
Comparative study on polysilazane and silicone resins as high-temperature-resistant coatings

Chenwei Sun,Dan Wang,Caihong Xu,Wenyi Chen,Zongbo Zhang

DOI: https://doi.org/10.1177/09540083211069041

IF: 1.73

2022-02-22

High Performance Polymers

Abstract:The development of high-temperature-resistant coatings is crucial, which demands a new adhesive resin owing to harsh service conditions. In this work, the structural evolution and basic performance of three different polysilazanes with a Si–N backbone are studied, which is further compared to a typical silicone resin with a Si–O backbone. Experimental results show that polysilazanes with different structures undergo a two-step oxidation process with a residual weight higher than 77% in comparison to the one-step degradation of silicone with a weight loss higher than 47% at 800°C under flowing air atmosphere. Additionally, the decrease in thickness of polysilazane-resin coating is below 50%, while that of the silicone-resin coating is higher than 77%, which affords a crack- and defect-free morphology in polysilazanes and blistering and particle aggregation in the silicone after a temperature treatment at 800°C. Thus, our study demonstrates that polysilazanes are potential alternative choices as resin adhesives for high-temperature-resistant coatings rather than silicone-based resins, in extremely harsh conditions.

polymer science
Benzocyclobutene-functionalized Hyperbranched Polysiloxane for Low-K Materials with Good Thermostability

Yunfei Shi,Jing Cai,Xueliang Wu,Yuanrong Cheng

DOI: https://doi.org/10.1080/15685551.2021.1975383

2021-01-01

Designed Monomers & Polymers

Abstract:Although hyperbranched polysiloxanes have been extensively studied, they have limited practical applications because of their low glass transition temperatures. In this study, we synthesized benzocyclobutene-functionalized hyperbranched polysiloxane (HB-BCB) via the Piers-Rubinsztajn reaction. The synthesized material was cured and crosslinking occurred at temperatures greater than 200 °C, forming a low-k thermoset resin with high thermostability. The structure of the resin was characterized using nuclear magnetic resonance (NMR) spectroscopy, viz. 1H NMR and 13C NMR spectroscopy. 29Si NMR spectroscopy was used to calculate the degree of branching. Differential scanning calorimetry, dynamic mechanical analysis, and thermogravimetric analysis revealed that the cured resin possesses good high-temperature mechanical properties and exhibits a high thermal decomposition temperature (Td5 = 512 °C). In addition, the cured resin has a low dielectric constant (k = 2.70 at 1 MHz) and low dissipation factor (2.13 × 10−3 at 1 MHz). Thus, the prepared resin can function as a low-k material with excellent high-temperature performance. These findings indicate that the performance of crosslinked siloxane is significantly attributed to the introduction of BCB groups and the formation of the highly crosslinked structure.
Synthesis and Characterization of Thermooxidatively Stable Poly(dimethylsilyleneethynylenephenyleneethynylene) with O-Carborane Units

Canfeng Wang,Yan Zhou,Farong Huang,Lei Du

DOI: https://doi.org/10.1016/j.reactfunctpolym.2011.05.005

2011-01-01

Abstract:Carborane-containing poly(dimethylsilyleneethynylenephenyleneethynylene) (CB-PSEPE) with o-carborane in main chains was prepared by a coupling reaction between poly(dimethylsilyleneethynylenephenyleneethynylene) (PSEPE) and decaborane (B10H14) in the presence of acetonitrile (CH3CN). The chemical structures of CB-PSEPE were determined by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies. The glass transition temperature (Tg) and thermal curing behavior of CB-PSEPE were evaluated with differential scanning calorimetry (DSC). The thermal and thermooxidative stabilities were examined by thermogravimetric analysis (TGA). The results show that CB-PSEPE polymer could be converted into a thermoset below 250 °C. The thermoset exhibits excellent heat resistance especially under air atmosphere. The residue yield at 800 °C arrives at 95.8% for CB-PSEPE thermoset in air. When the thermoset was oxidized at 800 °C for 1 h in air, a protective layer would be formed on the surface of the oxidized product according to scanning electron microscopy (SEM) observations.
Investigation of Poly(Carbosilane Arylacetylene)S with Thermal Oxidation Resistance

Shuaikang Lv,Changjun Gong,Shuyue Liu,Liqiang Wan,Farong Huang,Qiaolong Yuan

DOI: https://doi.org/10.1016/j.reactfunctpolym.2024.106006

IF: 4.966

2024-01-01

Reactive and Functional Polymers

Abstract:The aerospace industry demands a resin matrix with excellent thermal oxidation resistance for advanced composites. A series of poly(carbosilane arylacetylene)s (PCSAs) resins with high silicon content were synthesized via arylacetylene Grignard reagents with polychlorocarbosilane polycondensation in this study. The cured PCSAs were obtained by heating at 150 degrees C for 2 h, 170 degrees C for 2 h, 210 degrees C for 2 h, and 250 degrees C for 4 h. The temperature at which PCSAs lose 5% weight (Td5) is approximately 600 degrees C under a nitrogen atmosphere. The cured PCSAs do not exhibit a glass transition temperature in the range of 50 degrees C - 450 degrees C. The cured PCSAs demonstrate outstanding thermal oxidation resistance, with a Td5 of approximately 560 degrees C under the air atmosphere. The cured PCSA with high silicon content can retain up to 75% of its weight when exposed to flowing air for 480 h at 300 degrees C. The retention of mechanical properties of carbon fiber cloth reinforced PCSAs composites (CF/PCSAs) improves with increasing silicon content after 100 h of thermal aging under flowing air at 300 degrees C. The increase in silicon content is beneficial for reducing surface cracking of cured resins and preventing internal matrix oxidation. Moreover, cured PCSAs can serve as a precursor to be pyrolyzed at 1500 degrees C to form beta-SiC crystal. These results suggest that PCSAs are suitable as a heat-resistant matrix for advanced composites.
Advanced Aromatic Polymers with Excellent Anti-Atomic Oxygen Performance Derived from Molecular Precursor Strategy and Copolymerization of Polyhedral Oligomeric Silsesquioxane.

ping wang,y s tang,zhongfang yu,jianren gu,juan kong

DOI: https://doi.org/10.1021/acsami.5b05490

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:In this contribution, the advanced aromatic polymers with excellent antiatomic oxygen (AO) performance were designed and synthesized using molecular precursor strategy and copolymerization of polyhedral oligomeric silsesquioxane (POSS). A soluble poly(p-phenylene benzobisoxazole) (PBO) precursor, that is, TBS–PBO (tert-butyldimethylsilyl was denoted as TBS), was designed to overcome the poor solubility of PBO in organic solvents. Then the new copolymer of TBS–PBO–POSS was synthesized by the copolymerization of TBS–PBO and POSS, which possessed good solubility and film-forming ability in common organic solvents, such as N-methylpyrrolidone, N,N-dimethylacetamide, and dimethyl sulfoxide. More importantly, the TBS–PBO–POSS films exhibited outstanding antiatomic oxygen properties because of the incorporation of POSS monomers with cagelike structure into the main chain of copolymer, which drastically reduced the AO-induced erosion owing to the formation of the passivating silica layer on the surface of polymer...
A novel oxidation resistant SiC/B 4 C/C nanocomposite derived from a carborane-containing conjugated polycarbosilane

Canfeng Wang,Farong Huang,Yun Jiang,Yan Zhou,Lei Du

DOI: https://doi.org/10.1111/j.1551-2916.2011.04972.x

IF: 4.186

2012-01-01

Journal of the American Ceramic Society

Abstract:A novel oxidation resistant SiC/B4C/C nanocomposite was prepared by the pyrolysis of carborane-containing poly(silyleneethynylenephenyleneethynylene) (CB-PSEPE) at 1450 degrees C in argon. The phase composition and microstructure of the carbon-rich ceramic were investigated by X-ray diffraction, Raman spectroscopy and transmission electron microscopy. The beta-SiC (similar to 12 similar to nm) and B4C (similar to 20 similar to nm) nanocrystalline phases were formed during the pyrolysis process of CB-PSEPE. The presence of boron in CB-PSEPE promotes the growth of beta-SiC nanocrystals. The ceramic shows excellent thermooxidative stability based on thermogravimetric analysis in air. A borosilicate layer was formed on the surface of the ceramic after oxidation. This carborane-containing conjugated polycarbosilane could be a potential precursor for oxidation resistant carbon-based materials.
Silicon Alkyne Hybrid Polymers Containing Si–H and Si–CH3

Shuaishuai Liu,Quan Zhou,Zhengqiang Peng,Ning Song,Lizhong Ni

DOI: https://doi.org/10.1177/0954008317698546

IF: 1.73

2017-01-01

High Performance Polymers

Abstract:A silicon-containing polymer (HMSA), synthesized with n-BuLi, trichloroethylene, dichloromethylsilane, and dimethyldichlorosilane, with three different proportions of Si–H, and its influence on thermal oxidation have been studied. The structures of HMSA were characterized by Fourier transform infrared spectra, 1H-Nuclear Magnetic Resonance (H-NMR), 13C-NMR, 29Si-NMR, and gel permeation chromatography. Thermal and oxidative stabilities were studied by differential scanning calorimetry and thermogravimetric analysis, and the cross-linking reaction mechanisms of the HMSA were discussed. All the polymers exhibited excellent thermal and oxidation resistance; particularly, HMSA-1 showed high heat-resistant and thermo-oxidative stability; the temperatures of 5% weight loss ( Td5) were 636.3 and 645.5°C, and the residues at 1000°C were 87.07 and 86.23% in nitrogen and air, respectively. This system had excellent thermal and oxidative stability, and through the structure design, control of heat oxidation resistance was realized.
Design and Synthesis of Non-Crystallizable, Low-Tg Polysiloxane Elastomers with Functional Epoxy Groups Through Anionic Copolymerization and Subsequent Epoxidation

Yang Meng,Junfeng Chu,Jiajia Xue,Chaohao Liu,Zhen Wang,Liqun Zhang

DOI: https://doi.org/10.1039/c4ra02293a

IF: 4.036

2014-01-01

RSC Advances

Abstract:Although polysiloxane elastomers have many merits, their fast crystallization at low temperature is problematic in some fields. In this study, a novel non-crystallizable, low-T-g epoxidized polysiloxane (ESR) with functional epoxy groups in side chains was designed and synthesized though two steps: (i) the preparation of poly(methylvinylsiloxane) (SR) by anionic ring-opening copolymerization of 2,4,6,8-tetramethyl-2,4,6,8-tetravinyl cyclotetrasiloxane and octamethylcyclotetrasiloxane, and (ii) the subsequent epoxidation of the SR. Reaction kinetic studies demonstrated that the epoxidation of SR was a second-order reaction and more than 90% of the double bonds were converted into epoxy groups during the epoxidation. Despite a slight increase in the T-g of ESRs as the content of epoxy groups increased, the low-temperature performances of ESRs were greatly improved because of the inhibition of the crystallization of polysiloxane chains. Surprisingly, the ESRs also showed higher thermal degradation temperatures than the traditional poly(dimethylsiloxane) did. The excellent low-temperature performance and high degradation temperatures endowed the ESR with great potential as an elastic material in the aerospace industry where materials have to undergo very high and low temperature.
Multibenzocyclobutene Functionalized Silane for Low-k Polyarylsilane Thermosets with Low Coefficient of Thermal Expansion and High Thermostability

Yuanrong Cheng,Jing Cai,Junyi Li,Xueliang Wu,Yunfei Shi,Jun Wang

DOI: https://doi.org/10.1021/acsapm.9b00519

2019-01-01

ACS Applied Polymer Materials

Abstract:Highly cross-linked thermosets have been extensively studied for their good thermostability and low coefficient of thermal expansion (CTE). Herein, multibenzocyclobutene (multi-BCB) functionalized silane monomers and the related thermosets as polyarylsilane are reported. These silane monomers can be cured at a high temperature above 200 degrees C. After curing, the corresponding transparent thermosets showed good thermal property. The results indicated that more benzocyclobutene (BCB) groups on the corresponding silane monomer induced a higher cross-linked structure, which contributes to improve heat resistance, glass transition temperature (T-g), and dimensional stability. Particularly, the cured tetra(benzocyclobutene-4-yl) silane (SiB4) showed extremely high T-g over 400 degrees C, high initial storage modulus, and good thermostability (T-d5 = 532 degrees C). The cured SiB4 also showed excellent thermomechanical properties with a low CTE at 24 ppm/degrees C. These polymers also showed good dielectric properties with a low k below 2.70. The low-k material with a low CTE may be a good candidate for high-performance composite resin matrix and high-density substrates.
Water Permeation and Corrosion Resistance of Single- and Two-Component Hydrophobic Polysiloxane Barrier Coatings

X. Sun,S. Turnage,E. B. Iezzi,Y. Yang,B. Chang,N. C. Muthegowda,S. K. Balijepalli,Nicholas Dhuyvetter,L. P. Wang,K. N. Solanki,K. Rykaczewski

DOI: https://doi.org/10.1007/s11998-017-9918-5

2017-01-01

Abstract:The degradation of corrosion preventative coatings contributes to the high cost and time requirements for maintaining structures in harsh environments. However, the development of new hydrophobic coatings holds the promise of extending the usable life of structures in marine environments. In this work, we quantify the barrier properties and corrosion resistance of two novel highly hydrophobic polysiloxane formulations and the legacy silicone alkyd topcoat used on the topside of Navy’s ships, all with haze gray pigmentation. Based on FTIR-ATR and EIS measurements of the pristine coatings, both the single- (1K) and the two-component (2K) polysiloxane provide significantly improved barrier characteristics (lower water diffusion coefficient and capacitance) than the silicone alkyd. These results were confirmed through a 3-month-long immersion corrosion test, which also showed that the 1K and 2K polysiloxane coatings had comparable degradation characteristic and remained highly hydrophobic.
Corrosion resistance of novel silane-functional polybenzoxazine coating on steel

Changlu Zhou,Xin Lu,Zhong Xin,Juan Liu

DOI: https://doi.org/10.1016/j.corsci.2013.01.023

IF: 7.72

2013-01-01

Corrosion Science

Abstract:A novel silane-functional polybenzoxazine (PB-TMOS) coating, with silane groups that can bond to the substrate, was prepared through a dip-coating and thermal curing method. The coating properties were investigated by Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance spectroscopy, static contact angle measurement, electrochemical and accelerated corrosion tests. The corrosion resistant performance of PB-TMOS coated specimens was considerably enhanced by the high hydrophobicity and water resistance resulted from the dual cross-linking network of polybenzoxazine and Si-O-Si in PB-TMOS matrix. © 2013 Elsevier Ltd.
Polymer derived SiBCN(O) ceramics with tunable element content

Bijie Wang,Yujie Song,Xiao Zhang,Ke Chen,Ming Liu,Xiao Hu,Liu He,Qing Huang

DOI: https://doi.org/10.1016/j.ceramint.2021.12.246

IF: 5.532

2022-04-01

Ceramics International

Abstract:SiBCN ceramics have excellent high-temperature stability and anti-oxidation properties, and they are candidates for materials used at extreme conditions. In this paper, amorphous SiBCN(O) ceramics were obtained through pyrolysis of cross-linked polyborosilazanes. The element content could be readily tuned through adjusting the structures of polymer precursors. The cerminization process and microstructure evolution process were systematically investigated. The SiBCN(O) ceramics remain amorphous below 1400 °C. The carbothermal reduction was suppressed because of the presence of boron. The SiBCN(O) ceramics showed 95.7% and 99.2% carbon residual in argon and air at 1600 °C, indicating high-temperature stability and good anti-oxidation properties. These SiBCN(O) precursors/ceramics could be potentially used in composites or protective coatings for harsh environments.

materials science, ceramics

Poly(cyclosiloxane–carborane)s for harsh environments

Recent advances in carborane-siloxane polymers

High-Temperature Resistant Polyborosilazanes with Tailored Structures

Synthesis of CO2-Derived, Siloxane-Functionalized Poly(ether Carbonate)s and Waterborne Polyurethanes

O-Carborane-containing Poly(siloxane-arylacetylene)s with Thermal and Thermo-Oxidative Stabilities

Improved Wear Resistance and Environmental Adaptability of a Polysiloxane/Molybdenum Disulfide Composite Lubricating Coating Using Polyhedral Oligomeric Silsesquioxane

Synthesis and Properties of Carborane/POSS Composites

Anchoring Effect of Hyperbranched Carborane in Highly Cross-Linked Cyclosiloxane Networks toward High-Performance Polymers

Oxidation behavior of carbon materials derived from a carborane- and silicon-incorporated polymer

Comparative study on polysilazane and silicone resins as high-temperature-resistant coatings

Benzocyclobutene-functionalized Hyperbranched Polysiloxane for Low-K Materials with Good Thermostability

Synthesis and Characterization of Thermooxidatively Stable Poly(dimethylsilyleneethynylenephenyleneethynylene) with O-Carborane Units

Investigation of Poly(Carbosilane Arylacetylene)S with Thermal Oxidation Resistance

Advanced Aromatic Polymers with Excellent Anti-Atomic Oxygen Performance Derived from Molecular Precursor Strategy and Copolymerization of Polyhedral Oligomeric Silsesquioxane.

A novel oxidation resistant SiC/B 4 C/C nanocomposite derived from a carborane-containing conjugated polycarbosilane

Silicon Alkyne Hybrid Polymers Containing Si–H and Si–CH3

Design and Synthesis of Non-Crystallizable, Low-Tg Polysiloxane Elastomers with Functional Epoxy Groups Through Anionic Copolymerization and Subsequent Epoxidation

Multibenzocyclobutene Functionalized Silane for Low-k Polyarylsilane Thermosets with Low Coefficient of Thermal Expansion and High Thermostability

Water Permeation and Corrosion Resistance of Single- and Two-Component Hydrophobic Polysiloxane Barrier Coatings

Corrosion resistance of novel silane-functional polybenzoxazine coating on steel

Polymer derived SiBCN(O) ceramics with tunable element content