Abstract:A simple spray approach to fabricate superhydrophobic coatings on tile and glass substrates is presented. Commercial available polyphenylene sulfide (PPS) and hydrophobic silica (H-SiO(2)) powder were suspended in ethanol and the mixed suspensions were spray on substrates. After dried at different temperatures, surface coatings with different hydrophobicity were obtained. By observing the surface morphologies with scanning electron microscope (SEM) and atomic force microscope (AFM), and measuring water contact angles with a contact angle system, factors affecting the morphology, roughness and contact angle of the surface coatings, such as thermal treatment temperature and the weight ratio of H-SiO(2) to PPS, were investigated in detail. With the increase of the thermal treatment temperature, both the surface roughness and the contact angle increased when the temperature was lower than 280 degrees C. As the weight ratio of H-SiO(2) to PPS rose from 1: 10 to 1:1, more H-SiO(2) powders accumulated on the surface, leading to a significant increase of hydrophobicity. The surface coating obtained at 280 degrees C with the weight ratio of H-SiO(2) to PPS 1:1 showed a water contact angle higher than 150 degrees and a sliding angle lower than 4, exhibiting fascinating superhydrophobic properties. The surface coating could remain superhydrophobicity upon a further increase in thermal treatment temperature or the amount of H-SiO(2) powder. Moreover, the surface coatings showed high contact angles, larger than 150, for all the solutions with pH ranging from 1 to 14. The abrasion resistant property of the as-prepared superhydrophobic surface coating was tested using a homemade setup. Being scraped by freely-falling sands, the superhydrophobic coating could keep its high hydrophobicity, while a commercial hydrophobic coating transformed from hydrophobicity to hydrophilicity. This result implied our superhydrophobic surface coating was very stable. Moreover, chalk powders on the superhydrophobic surface coatings could easily be washed off with water, indicating good self-cleaning properties. The presented approach is convenient and can be potentially applied in fabrication of superhydrophobic surfaces in large scale.

Controlling Superhydrophobicity on Complex Substrates Based on a Vapor-Phase Sublimation and Deposition Polymerization

A rapid and efficient strategy for creating super-hydrophobic coatings on various material substrates

Functional and versatile superhydrophobic coatings via stoichiometric silanization

Fabrication of a Superhydrophobic Coating with High Adhesive Effect to Substrates and Tunable Wettability

Simple Spray Deposition of A Water-Based Superhydrophobic Coating with High Stability for Flexible Applications

Facile Preparation of Robust Superamphiphobic Coatings on Complex Substrates via Nonsolvent-Induced Phase Separation

Transforming a Simple Commercial Glue into Highly Robust Superhydrophobic Surfaces Via Aerosol-Assisted Chemical Vapor Deposition.

Facile Preparation Of Superhydrophobic Coating By Spraying A Fluorinated Acrylic Random Copolymer Micelle Solution

Fabrication of Transferable and Micro/Nanostructured Superhydrophobic Surfaces Using Demolding and iCVD Processes

Fabrication of superhydrophobic coating via a facile and versatile method based on nanoparticle aggregates

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

One-step Fabrication of a Robust and Transparent Superhydrophobic Self-Cleaning Coating Using a Hydrophobic Binder at Room Temperature: A Combined Experimental and Molecular Dynamics Simulation Study

Construction of Waterborne Superhydrophobic Coatings with Controlled Water‐droplet Adhesion

Facile Fabrication of Superhydrophobic Polymethyltriethoxysilane- Polymethylhydrosiloxane Coatings

PREPARATION AND PROPERTIES OF SUPERHYDROPHOBIC POLYPHENYLENE SULFIDE COMPOSITE COATINGS

Robust translucent superhydrophobic PDMS/PMMA film by facile one-step spray for self-cleaning and efficient emulsion separation

Adjusting droplet adhesion of superhydrophobic coating via surface embedding of microparticles with mixed shapes

Modification of Commercial Polymer Coatings for Superhydrophobic Applications

Preparation of Breathable and Superhydrophobic Coating Film Via Spray Coating in Combination with Vapor-Induced Phase Separation

Dip-coating of Superhydrophobic Surface on Irregular Substrates for Dropwise Condensation

Multi-Scenario Applications of Fluoro-Free Super Liquid-Repellent Particles Prepared Through Excluded Volume Effect