Abstract:Graphene is a kind of very promising filler for polymer composites, but its irreversible aggregation when introduced into polymers is a challenge for property enhancements and limits its industrial application. To address this, we report one-step covalent functionalization and simultaneous reduction of graphite oxide (GO) with hydroxyethyl acrylate (HEA), resulting in a functionalized graphene with double bonds. The functionalized graphene obtained, noted as FGN, is successfully incorporated into polymethyl methacrylate (PMMA) matrix by latex technology and melt blending. Latex technology is used for the pretreatment of FGN through emulsion copolymerization between methyl methacrylate (MMA) monomers and FGN double bonds. After pretreatment of FGN, covalent attachment of PMMA particles to the edges of FGN sheets can effectively prevent their agglomeration and markedly improve their dispersion in the polymer matrix. Since these PMMA particles act as good compatibilizers in the interface between FGN and PMMA matrix during the melt mixing process, the PMMA/FGN composites obtained exhibit exfoliated morphology and very good dispersion, as evinced by the results from X-ray diffraction (XRD) and transmission electron microscopy (TEM). When even a small amount of FGN (⩽1.0wt%) is incorporated, the thermal properties and mechanical properties of PMMA/FGN composites are enhanced significantly. The glass transition temperature (Tg) increases from 103.8 to 110.5°C, while the tensile strength increases by 31.0% (1.0wt% FGN addition). Moreover, the storage modulus of PMMA/FGN composites increases by 27% (1.0wt% FGN addition) at room temperature. These enhancements are attributed to the strong chemical interaction between the FGN sheets and PMMA and the good distribution of FGN sheets in the PMMA matrix.

Melt processing of graphene-coated polylactide granules for producing biodegradable nanocomposite with higher mechanical strength

Progress in Nanocomposites of Polylactic Acid

Improvement of the mechanical and shape memory properties in polylactide/polyethylene glycol blends by reactive graphene oxide

Studies on the effect of polylactide in-situ grafting during melt processing on poly( ʟ -lactide)/graphene oxide composite films

Greatly enhanced mechanical properties and heat distortion resistance of poly(l-lactic acid) upon compositing with functionalized reduced graphene oxide

Shape memory performances of homogeneous poly(L-lactide-co-ε-caprolactone)/polytrimethylene carbonate-grafted functionalized graphene oxide nanocomposites

Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples

Effect of Graphene Oxide Localization on Morphology Development and Rheological and Mechanical Properties of Poly(Lactic Acid)/Ethylene Vinyl Alcohol Copolymer Blend Composites: A Comprehensive Study

Compatibilizing Biodegradable Poly(lactic Acid)/Polybutylene Adipate-co-terephthalate Blends via Reactive Graphene Oxide for Screw-Based 3D Printing

Preparation and characterization of poly (lactic acid) (PLA)/polyamide 6 (PA6)/graphene nanoplatelet (GNP) blends bio-based nanocomposites

Promoting the Dispersion of Graphene and Crystallization of Poly (lactic Acid) with a Freezing-Dried Graphene/peg Masterbatch

Melting and Crystallization Behaviors of Poly(Lactic Acid) Modified with Graphene Acting as a Nucleating Agent

A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites

Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments

A review: studying the effect of graphene nanoparticles on mechanical, physical and thermal properties of polylactic acid polymer

Multi-approach synthesis of functionalized graphene oxide as reinforcement for polyethylene: Make a strong interaction

Synthesis and Characterization of the Novel Nanocomposites Based on Graphene Oxide/PLLA/PEG-PPG/PLCL Hybrids for Mechanical and Biomedical Applications

Preparation of Functionalized Graphene by Simultaneous Reduction and Surface Modification and Its Polymethyl Methacrylate Composites Through Latex Technology and Melt Blending

Preparation of hybrid composites of PLLA using GO/PEG masterbatch and their characterization

Fabrication and characterization of poly(lactic acid-trimethylene carbonate) based biodegradable composite films

Advanced biodegradable thermoplastic elastomer/reduced graphene oxide nanocomposites by in situ compositing process