Abstract:The present study substantiate that ultraviolet-nanoimprint lithography (UV-NIL) can be used to transfer a one-dimensional nano-pattern onto a high-k thin film of aluminum oxide mixed with a UV photocuring agent. Polydimethylsiloxane (PDMS) molds fabricated on silicon wafers were made using deep ultraviolet laser interference lithography in order to investigate one-dimension nanopatterns. These imprinted nano-patterns induce geometric deformations in the liquid crystal (LC), creating collective and elastic properties, which act as a guide for homogeneous alignment. The nanoimprint method can process a large area, so it can be processed much easier, faster, and more accurately than the conventional rubbing method. Moreover, the optical properties of the nano-imprinted aluminum oxide (AlO) thin-film are about 1.5p% superior to that of conventional commercialized cells, so it has a high effect on the luminance and color gamut of the display. After pattern imprinting, atomic force microscope (AFM) was performed to confirm the result. We can compared the cycle of AlO mixed with UV photocuring agent PDMS pattern cycle, the period is 776 and 750 nm, the width is 468 and 450 nm, the spacing is 292 and 300 nm, and the height is 40 and 30 nm. The nano-imprinted film appears to replicate the width, amplitude, and spacing of the PDMS template. In addition, X-ray photoelectron spectroscopy was performed to determine the chemical properties of the thin film and it was confirmed that UV irradiation induces oxidation, thus increases the intensity significantly. The binding energies of Al 2p and C-O spectra were situated at 74.27 ± 0.5 eV and 531.78 ± 0.5 eV, respectively.

Nafion Thin Films: Fabrication of Micro‐ and Nanopatterned Nafion Thin Films with Tunable Mechanical and Electrical Properties Using Thermal Evaporation‐Induced Capillary Force Lithography (Adv. Mater. Interfaces 7/2021)

Hidden Thermoreversible Actuation Behavior of Nafion and Its Morphological Origin

Functional Electrochemically-Active Ultra-Thin Nafion Films

Modification for Uniform Surface of Nafion Ultrathin Film Deposited by Inkjet Printing

The effect of direct electron beam patterning on the water uptake and ionic conductivity of Nafion thin films

Unraveling the Intrinsic Thermal Behavior of Freestanding Ionomer Films Depending on Thickness from Commercial Membrane to Nanofilm

Direct Fabrication of Freestanding and Patterned Nanoporous Junctions in a 3D Micro-Nanofluidic Device for Ion-Selective Transport

A polymer-based artificial microenvironment for enhancing cell adhesion

Impact of Initial Cyclic Loading on Mechanical Properties and Performance of Nafion

Mesoscale simulations of confined Nafion thin films

Nafion: A Flexible Template for Selective Structuring

Nanoscale Thickness Control of Nanoporous Films Derived from Directionally Photopolymerized Mesophases

Ion movement in thin Nafion films under an applied electric field

Nanoscale manipulation of materials patterning through thermomechanical nanolithography using atomic force microscopy

High‐Resolution and Facile Patterning of Silver Nanowire Electrodes by Solvent‐Free Photolithographic Technique Using UV‐Curable Pressure Sensitive Adhesive Film

Superior nanopatterns via adjustable nanoimprint lithography on aluminum oxide in high-K thin films with ultraviolet curable polymer

A simple and efficient transfer method for fabricating stretchable AgNW patterns on PDMS using carboxylated cellulose nanofibers as a sacrificial layer

Longitudinal strand ordering leads to shear thinning in Nafion

Nafion spin coating inside nano / micro structured cathode for three-phase interface control in micro-dmfc

Performance Dependence of Swelling-Filling Treated Nafion Membrane on Nano-Structure of Macromolecular Filler

Preferential Forest-assembly of Single-Wall Carbon Nanotubes on Low-energy Electron-beam Patterned Nafion Films