Abstract:Americium (Am), a radioactive element, is highly valued for its commercial uses. Its source is primarily derived from high-acid, high-radiation, and high-temperature high-level radioactive waste liquids, requiring materials that are capable of enduring the most intense conditions for its capture. For this challenging environment, we successfully created a composite material TODGA@SiO 2 that is capable of effectively separating Am 3+ . An exhaustive evaluation of the material was undertaken, focusing on essential parameters and the column behavior of the material to ascertain its suitability for engineering applications. The composite is highly resistant to acid (>3 M HNO 3 ), can withstand temperatures up to 200 °C, and is radiation resistant up to 200 kGy, making it a great choice. Highlighting its suitability for radioactive waste, the adsorbent exhibited outstanding stability even after being soaked in 3 M HNO 3 for 11 days. In terms of performance, this material had a rapid kinetics (1 min, >95 %), a considerable adsorption capacity ( K d value close to 3 × 10 5 mL/g), and a high selectivity for Am 3+ . From a cost and environmental protection perspective, the adsorbent can be regenerated and reused at least five times, and the extractant structure adheres to the CHON (Carbon, Hydrogen, Oxygen, and Nitrogen) principle, so orderly disposal is simple. At the same time, the high column efficiency, with a recovery rate of Am 3+ of more than 94 %, makes its industrial application highly practical. In comparison to existing adsorbents, the material reported in this work has shown greater efficacy, making it a suitable inorganic composite for Am 3+ extraction from radioactive liquid waste.

Redox Stabilization of Am(V) in a Biphasic Extraction System Boosts Americium/Lanthanides Separation Efficiency

Ultra-Efficient Americium/Lanthanide Separation through Oxidation State Control

Separation of Americium from Curium Through Oxidation State Control with Record Efficiency

Computation-Aided Development of Next-Generation Extractants for Trivalent Actinide and Lanthanide Separation

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Ultrafiltration separation of Am(VI)-polyoxometalate from lanthanides

Ultrafiltration separation of nanoscale Am(VI)-polyoxometalate clusters from lanthanides

Separation of europium as a homologue of americium from high acidity solutions using a manufactured resin material

Improving the Robustness of Trivalent Actinides/Lanthanides Separation by Bis(2,4,4-trimethylpentyl)dithiophosphinic Acid: Batch Extraction and Process Demonstration

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

Interlayer confinement mediated oxidation of Americium by sodium bismuthate and stability of its higher redox states in acidic solution

Enhanced Separation of Americium and Curium in Cyanex301 System by Using Formic Acid and Glycolic Acid as Stripping Chelates

New approaches to the separation and concentration of americium in high oxidation forms for the fractionation of high-level waste

Studies on the separation treatment of high-level liquid waste by bisamide podand(I): Extraction and separation of An(III) from Ln(III)

Theoretical Insights into the Separation of Am(Iii) over Eu(Iii) with Phenbhppa

Separation of Americium from Fission Product Lanthanides Using Cyanex 301 Extraction

Efficient Separation Between Trivalent Americium and Lanthanides Enabled by a Phenanthroline-Based Polymeric Organic Framework

Extraction of americium and lanthanides by dialkyldithiophosphinic acid and f-f absorption spectra of the extraction complexes

Review of the recent developments in the separation of americium form lanthanide

Separation of Americium from Lanthanides by Purified Cyanex 301 Countercurrent Extraction in Miniature Centrifugal Contactors

Americium Recovery from Highly Active PUREX Raffinate by Solvent Extraction: The EXAm Process. A Review of 10 Years of R&D