Abstract:Thermochemical conversion of biomass has been studied extensively over the last decades. For the design, optimization and modeling of thermochemical conversion processes, such as fixed bed pyrolysis, a sound understanding of pyrolysis is essential. However, the decomposition mechanism of most biomass types into gaseous, liquid, and solid fractions is still unknown because of the complexity of pyrolysis and differences in biomass composition.The aim of this study was to find characteristic differences in the pyrolysis behavior of three widely used biomass feedstocks to optimize the performance of industrial fixed bed pyrolysis. This aim was achieved in three steps. First, devolatilization kinetics during pyrolysis of three biomass types was investigated in a thermogravimetric analyzer (TGA). Then, a one-step multi-component pyrolysis model with three independent parallel reactions for hemicellulose, cellulose and lignin was derived to correlate the kinetics with single component decomposition and to identify their amount in the biomass sample. In a final step, the findings were tested in a fixed bed reactor at laboratory scale to prove applicability in industrial processes.Three types of biomass were chosen for this investigation: wheat straw, rape straw and spruce wood with bark. They represent biomass with a high cellulose, hemicellulose and lignin content, respectively. Since lignin is the most stable and complex of these three biomass components, its amount is assumed to be the main controlling factor in the thermochemical decomposition process.The thermogravimetric (TG) curve of spruce wood with bark was found to shift to about 20K higher temperatures compared to the TG curves of straw and rape straw. This result indicates that a higher activation energy is needed to decompose woody biomass, which contains a higher amount and a different type of lignin than straw. Three wood decomposition phases were distinguished from the negative first derivatives curves (DTG): a shoulder during hemicellulose decomposition, a peak during cellulose decomposition and a smaller rise during lignin decomposition. By comparison both herbaceous biomass types decomposed in only two phases at lower temperatures. The decomposition of the herbaceous, and woody biomass samples was completed at about 830K and 900K, respectively, leaving only a solid residue of ash. The derived pyrolysis model estimated the composition and described the devolatilization curves of each biomass with sufficient accuracy for industrial processes, although the same activation energy set, taken from the literature, was used for each biomass. In the fixed bed pyrolysis experiments similar characteristics were found to those in the TGA experiments. Herbaceous biomass with a higher cellulose and hemicellulose content decomposed faster and produced a larger fraction of gaseous products than woody biomass with a higher lignin content. According to the assessment of the product distribution, performed after each experiment, woody biomass pyrolysis led to a larger fraction of solid products than herbaceous biomass pyrolysis. We conclude that industrial fixed bed pyrolysis can be optimized for different biomass feedstocks with a specific composition of cellulose, hemicellulose and lignin.

Estimating slow pyrolysis products and standard enthalpy values of cellulignins from sugarcane bagasse, barley straw and Eucalyptus grandis: a comprehensive analysis using physical–chemical and thermal data

Unveiling the pyrolysis mechanisms of cellulose: Experimental and theoretical studies

Cellulose pyrolysis kinetic model: Detailed description of volatile species

Fast Pyrolysis Behavior of Lignocellulosic Biomass Model Compound: Releasing Properties, Kinetic Analysis of the Primary Gaseous Products and Char Structure Evolution from Cellulose

On-line analysis on fast pyrolysis of lignocellulosic biomass: thermal behavior and kinetic analysis of hemicellulose

Kinetic Analysis of Tropical Lignocellulosic Agrowaste Pyrolysis

Pyrolysis of the hybrid energy cane: thermal decomposition and kinetic modeling using non-isothermal thermogravimetric analysis

Quantitative Insights into the Fast Pyrolysis of Extracted Cellulose, Hemicelluloses, and Lignin

The effect of the biomass components lignin, cellulose and hemicellulose on TGA and fixed bed pyrolysis

Novel Insights into the Kinetics, Evolved Gases and Mechanisms for Biomass (sugar Cane Residue) Pyrolysis.

Pyrolysis of Energy Cane Bagasse: Investigating Kinetics, Thermodynamics, and Effect of Temperature on Volatile Products

Cellulose, hemicellulose and lignin slow steam pyrolysis: Thermal decomposition of biomass components mixtures

Pyrolytic Behavior and Kinetic Analysis of Wheat Straw and Lignocellulosic Biomass Model Compound

Influence of pyrolysis temperature and time on the cellulose fast pyrolysis products: Analytical Py-GC/MS study

Pyrolysis characteristics and kinetics of five isolated lignins from sugarcane bagasse

Comparative study on pyrolysis and catalytic pyrolysis upgrading of biomass model compounds: thermochemical behaviors, kinetics, and aromatic hydrocarbon formation

Theoretical Study on Thermodynamic Properties of Pyrolysis of Cellulose Dimer Model Compound

Prediction of Concentration Profiles and Theoretical Yields in Lignocellulosic Biomass Pyrolysis

Insight into kinetic and Thermodynamic Analysis methods for lignocellulosic biomass pyrolysis

The impact of acid hydrolysis conditions on carbohydrate determination in lignocellulosic materials: a case study with Eucalyptus globulus bark

Modeling and Kinetic Parameter Estimation of the Enzymatic Hydrolysis Process of Lignocellulosic Materials for Glucose Production